# Alarms Active status is not changed, if I changed the Set points after active alarms

**URL:** <https://forum.inductiveautomation.com/t/alarms-active-status-is-not-changed-if-i-changed-the-set-points-after-active-alarms/30929>\
**Category:** Ignition\
**Created:** [December 25, 2019, 9:56pm UTC](https://forum.inductiveautomation.com/t/alarms-active-status-is-not-changed-if-i-changed-the-set-points-after-active-alarms/30929 "2019-12-25T21:56:23Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![prashant.khamar](https://avatars.discourse-cdn.com/v4/letter/p/51bf81/32.png) [@prashant.khamar](https://forum.inductiveautomation.com/u/prashant.khamar)\
**Post date:** [December 25, 2019, 9:56pm UTC](https://forum.inductiveautomation.com/t/alarms-active-status-is-not-changed-if-i-changed-the-set-points-after-active-alarms/30929/1 "2019-12-25T21:56:23Z")

</div>

I am working on version 8.0 and I have setup the alarms many times and it is working OK initially then after if I changed the Set points after active alarms. It is not changing it’s status. e.g. if my Set point is 100 and PV crosses the 100, I am getting the alarm; to check the alarm, if I changed the Set point to 110; while PV is 105 which less then 110; still the alarm is showing active. It should be cleared. Could any one please explain?

---

<div class="post-metadata">

**Author:** ![OscarLucas](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/oscarlucas/32/6417_2.png) [@OscarLucas](https://forum.inductiveautomation.com/u/OscarLucas)\
**Post date:** [June 5, 2023, 9:59am UTC](https://forum.inductiveautomation.com/t/alarms-active-status-is-not-changed-if-i-changed-the-set-points-after-active-alarms/30929/2 "2023-06-05T09:59:49Z")

</div>

Similar problem. I have changes in the tag but the status is alwais in "is active" mode. I had check the program many times.

 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/c/9/c9cbef46d438c94c475fc6a471fc9102500e0b4d.jpeg)  
 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/4/2/429d1f3495a5a96e320e6569bfb16c1a21903122.jpeg)  
 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/a/b/aba89beb4d6b2130f8f1a45cf287ccffa910bc9a.jpeg)

Any idea?

---

<div class="post-metadata">

**Author:** ![dion.botha](https://avatars.discourse-cdn.com/v4/letter/d/46a35a/32.png) [@dion.botha](https://forum.inductiveautomation.com/u/dion.botha)\
**Post date:** [July 5, 2023, 8:22pm UTC](https://forum.inductiveautomation.com/t/alarms-active-status-is-not-changed-if-i-changed-the-set-points-after-active-alarms/30929/3 "2023-07-05T20:22:51Z")

</div>

Did you ever get to the bottom of this?

I am currently seeing something similar on a boolean tag that I have setup to alarm if equal to 0. is currently 0 and alarm is not active...