# Alarms Auto-Acknowledging in Manual Acknowledge mode

**URL:** <https://forum.inductiveautomation.com/t/alarms-auto-acknowledging-in-manual-acknowledge-mode/11344>\
**Category:** Ignition\
**Created:** [March 10, 2016, 9:46pm UTC](https://forum.inductiveautomation.com/t/alarms-auto-acknowledging-in-manual-acknowledge-mode/11344 "2016-03-10T21:46:19Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![dfenter](https://avatars.discourse-cdn.com/v4/letter/d/87869e/32.png) [@dfenter](https://forum.inductiveautomation.com/u/dfenter)\
**Post date:** [March 10, 2016, 9:46pm UTC](https://forum.inductiveautomation.com/t/alarms-auto-acknowledging-in-manual-acknowledge-mode/11344/1 "2016-03-10T21:46:19Z")

</div>

We are having an issue where alarms are Auto-Acknowledging in Manual Acknowledge mode.

I am using 7.7.4. Is this a known issue?

Dan

---

<div class="post-metadata">

**Author:** ![CarlosP](https://avatars.discourse-cdn.com/v4/letter/c/5f9b8f/32.png) [@CarlosP](https://forum.inductiveautomation.com/u/CarlosP)\
**Post date:** [July 22, 2016, 1:48pm UTC](https://forum.inductiveautomation.com/t/alarms-auto-acknowledging-in-manual-acknowledge-mode/11344/2 "2016-07-22T13:48:39Z")

</div>

I’m having the same issue with Ignition 7.8.2, did you find a solution for that problem?

---

<div class="post-metadata">

**Author:** ![Bart.van.Deurzen](https://avatars.discourse-cdn.com/v4/letter/b/b2d939/32.png) [@Bart.van.Deurzen](https://forum.inductiveautomation.com/u/Bart.van.Deurzen)\
**Post date:** [November 1, 2021, 1:18am UTC](https://forum.inductiveautomation.com/t/alarms-auto-acknowledging-in-manual-acknowledge-mode/11344/3 "2021-11-01T01:18:42Z")

</div>

I am seeing this too in 8.1.9. Was this ever resolved?