# Alert Summary displayPath filter

**URL:** <https://forum.inductiveautomation.com/t/alert-summary-displaypath-filter/4677>\
**Category:** Ignition\
**Created:** [June 21, 2012, 7:01am UTC](https://forum.inductiveautomation.com/t/alert-summary-displaypath-filter/4677 "2012-06-21T07:01:29Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![quper](https://avatars.discourse-cdn.com/v4/letter/q/aeb1de/32.png) [@quper](https://forum.inductiveautomation.com/u/quper)\
**Post date:** [June 21, 2012, 7:01am UTC](https://forum.inductiveautomation.com/t/alert-summary-displaypath-filter/4677/1 "2012-06-21T07:01:29Z")

</div>

Hello,  
Is it possible to filter items in Alert Summary table by displayPath?  
Now I see in Filters section only System Filter, Item Path Filter and Path Filter.  
I would like to open the same Alert Summary table from different pages and pass displayPath parameter, to see only alerts corresponding to my stations named in displayPath parameter.  
I have several pumping stations and their alarms have only displayPath in common. System filter is common for every station and every alarm, I cannot filter by this. Item Path Filter and Path Filter are different for every alarm, also impossible to group and filter by those.

---

<div class="post-metadata">

**Author:** ![quper](https://avatars.discourse-cdn.com/v4/letter/q/aeb1de/32.png) [@quper](https://forum.inductiveautomation.com/u/quper)\
**Post date:** [June 21, 2012, 7:41am UTC](https://forum.inductiveautomation.com/t/alert-summary-displaypath-filter/4677/2 "2012-06-21T07:41:26Z")

</div>

I figured out that Alert Summary table Path filter is really stand for displayPath!  
So no worries, now it works just fine.