# Alert Summary Table

**URL:** <https://forum.inductiveautomation.com/t/alert-summary-table/3540>\
**Category:** Ignition\
**Created:** [November 2, 2011, 3:58pm UTC](https://forum.inductiveautomation.com/t/alert-summary-table/3540 "2011-11-02T15:58:07Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Gavin](https://avatars.discourse-cdn.com/v4/letter/g/439d5e/32.png) [@Gavin](https://forum.inductiveautomation.com/u/Gavin)\
**Post date:** [November 2, 2011, 3:58pm UTC](https://forum.inductiveautomation.com/t/alert-summary-table/3540/1 "2011-11-02T15:58:07Z")

</div>

Hi,

Is it possible to filter the Alert Summary Table by multiple paths? I seem to be only able to filter by one path value at a time…

Thanks,  
Gavin

---

<div class="post-metadata">

**Author:** ![Robert.McKenzie](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/robert.mckenzie/32/4134_2.png) [@Robert.McKenzie](https://forum.inductiveautomation.com/u/Robert.McKenzie)\
**Post date:** [November 4, 2011, 6:23pm UTC](https://forum.inductiveautomation.com/t/alert-summary-table/3540/2 "2011-11-04T18:23:32Z")

</div>

You can use the % wildcard to get a set of paths to match. For example if you have these paths:  
Refrigerator1/Unit1/hoa  
Refrigerator1/Unit1/temp  
Refrigerator1/Unit2/hoa  
Refrigerator1/Unit2/temp  
Refrigerator2/Unit1/hoa  
Refrigerator2/Unit1/temp  
Refrigerator2/Unit2/hoa  
Refrigerator2/Unit2/temp

‘Refrigerator1%’ (without quotes) gives you:  
Refrigerator1/Unit1/hoa  
Refrigerator1/Unit1/temp  
Refrigerator1/Unit2/hoa  
Refrigerator1/Unit2/temp

‘%Unit1%’ (without quotes) gives you:  
Refrigerator1/Unit1/hoa  
Refrigerator1/Unit1/temp  
Refrigerator2/Unit1/hoa  
Refrigerator2/Unit1/temp