# .AlertDisplayPath?

**URL:** <https://forum.inductiveautomation.com/t/alertdisplaypath/7563>\
**Category:** Ignition\
**Created:** [November 12, 2013, 9:26pm UTC](https://forum.inductiveautomation.com/t/alertdisplaypath/7563 "2013-11-12T21:26:54Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![scott\_rister](https://avatars.discourse-cdn.com/v4/letter/s/5daacb/32.png) [@scott\_rister](https://forum.inductiveautomation.com/u/scott_rister)\
**Post date:** [November 12, 2013, 9:26pm UTC](https://forum.inductiveautomation.com/t/alertdisplaypath/7563/1 "2013-11-12T21:26:54Z")

</div>

Does the .alertDisplayPath property still exist in the new tag/alarm structure found in vers. 7.6.3?  
i had been using this property in a table to describe the tag and show its current status. I just realized the description is no longer showing up, presumably after the upgrade to 7.6.3. i do not get an error when populating the table just shows up as blank.  
Thanks for the help.  
Scott

---

<div class="post-metadata">

**Author:** ![Colby.Clegg](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/colby.clegg/32/3282_2.png) [@Colby.Clegg](https://forum.inductiveautomation.com/u/Colby.Clegg)\
**Post date:** [November 13, 2013, 9:33pm UTC](https://forum.inductiveautomation.com/t/alertdisplaypath/7563/2 "2013-11-13T21:33:37Z")

</div>

Hi,

Yes, as you’ve noticed, it’s gone. The issue is that where as that used to be a tag level setting, because each tag could only have 1 alert (which could potentially have various states), in 7.6 you can now have multiple alarms per tag.

There are a couple of new properties which aren’t quite the same thing, like “AlarmHighestUnackName” and “AlarmHighestAckName”, unfortunately there isn’t a direct replacement.

Regards,

---

<div class="post-metadata">

**Author:** ![scott\_rister](https://avatars.discourse-cdn.com/v4/letter/s/5daacb/32.png) [@scott\_rister](https://forum.inductiveautomation.com/u/scott_rister)\
**Post date:** [November 14, 2013, 3:35am UTC](https://forum.inductiveautomation.com/t/alertdisplaypath/7563/3 "2013-11-14T03:35:22Z")

</div>

Thanks for the info.  
Is there a list available of all the runtime tag properties?  
I looked in the user manual but could not find one.  
Thanks,  
Scott

---

<div class="post-metadata">

**Author:** ![greg.simpson](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/greg.simpson/32/3135_2.png) [@greg.simpson](https://forum.inductiveautomation.com/u/greg.simpson)\
**Post date:** [November 27, 2013, 5:27pm UTC](https://forum.inductiveautomation.com/t/alertdisplaypath/7563/4 "2013-11-27T17:27:23Z")

</div>

If you expand an individual tag in the SQLTags Browser you will see a list of available properties. There are many more properties but they are non-bindable. For a complete list you can look in Appendix C of the programmers guide. The programmers guide PDF can be found in the Module SDK download.