# Allen-Bradley Version 24 - supported yet?

**URL:** <https://forum.inductiveautomation.com/t/allen-bradley-version-24-supported-yet/10909>\
**Category:** Archived Topics\
**Created:** [December 11, 2015, 10:05pm UTC](https://forum.inductiveautomation.com/t/allen-bradley-version-24-supported-yet/10909 "2015-12-11T22:05:29Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![MP-SysEng](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/mp-syseng/32/3828_2.png) [@MP-SysEng](https://forum.inductiveautomation.com/u/MP-SysEng)\
**Post date:** [December 11, 2015, 10:05pm UTC](https://forum.inductiveautomation.com/t/allen-bradley-version-24-supported-yet/10909/1 "2015-12-11T22:05:29Z")

</div>

Does anyone know if AB Version 24 is supported yet by Ignition? Do we just follow the Version 21 driver setup steps?

Do we need any special modules or add ons for this?

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [December 11, 2015, 10:07pm UTC](https://forum.inductiveautomation.com/t/allen-bradley-version-24-supported-yet/10909/2 "2015-12-11T22:07:35Z")

</div>

The v21+ driver should work just fine.

---

<div class="post-metadata">

**Author:** ![accyroy](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/accyroy/32/3386_2.png) [@accyroy](https://forum.inductiveautomation.com/u/accyroy)\
**Post date:** [December 11, 2015, 10:38pm UTC](https://forum.inductiveautomation.com/t/allen-bradley-version-24-supported-yet/10909/3 "2015-12-11T22:38:58Z")

</div>

V24 works fine, as long as you don’t need to go out of the backplane. For some reason the V21+ driver has the Connection Path field missing when configuring.