# Allowed Proxy Hops setting

**URL:** <https://forum.inductiveautomation.com/t/allowed-proxy-hops-setting/75021>\
**Category:** Ignition\
**Tags:** ignition81\
**Created:** [June 14, 2023, 1:57pm UTC](https://forum.inductiveautomation.com/t/allowed-proxy-hops-setting/75021 "2023-06-14T13:57:47Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![hewking32](https://avatars.discourse-cdn.com/v4/letter/h/b5ac83/32.png) [@hewking32](https://forum.inductiveautomation.com/u/hewking32)\
**Post date:** [June 14, 2023, 1:57pm UTC](https://forum.inductiveautomation.com/t/allowed-proxy-hops-setting/75021/1 "2023-06-14T13:57:47Z")

</div>

hi  
I am trying to reach Edge Gateway from Azure hub via full ignition site gateway.  
In which place do i need to set "Allowed Proxy Hops" - all 3 places ?  
GAN network from Azure ignition to full site gateway already works.

What about zones - do i need to configure it everywhere or its ok to keep the default only if it allows the traffic?

---

<div class="post-metadata">

**Author:** ![hewking32](https://avatars.discourse-cdn.com/v4/letter/h/b5ac83/32.png) [@hewking32](https://forum.inductiveautomation.com/u/hewking32)\
**Post date:** [June 14, 2023, 4:56pm UTC](https://forum.inductiveautomation.com/t/allowed-proxy-hops-setting/75021/2 "2023-06-14T16:56:51Z")

</div>

after try and error it turned out that only full site gateway had to be configured to allow 1 hop setting to allow to reach the edge gateway