# Analysis Contoller and Run Analysis Provider Question

**URL:** <https://forum.inductiveautomation.com/t/analysis-contoller-and-run-analysis-provider-question/6775>\
**Category:** 3rd Party Modules\
**Created:** [June 26, 2013, 11:58pm UTC](https://forum.inductiveautomation.com/t/analysis-contoller-and-run-analysis-provider-question/6775 "2013-06-26T23:58:10Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Craig\_Tomison](https://avatars.discourse-cdn.com/v4/letter/c/3ec8ea/32.png) [@Craig\_Tomison](https://forum.inductiveautomation.com/u/Craig_Tomison)\
**Post date:** [June 26, 2013, 11:58pm UTC](https://forum.inductiveautomation.com/t/analysis-contoller-and-run-analysis-provider-question/6775/1 "2013-06-26T23:58:10Z")

</div>

I am trying to use a production Bar chart and an analysis controller to display production counts for machines.

I want to filter it down to show individual bars in the chart for 6 machines that are in a Cell Group. I am comparing by Cell Name and have set Cell Production count as the data points.

I am using the Run Analysis provider. If I use the Cell Group name in the Cell Name filter it will give a total of all of the production counts of all cells in the group in 1 bar but not the 6 individual totals. Is there a way to display the data I want?

I have done a similar thing with the same machines for downtime occurrences using the downtime provider but it gives me the option to filter by Cell Group Name, the Run provider does not.

Thanks,

---

<div class="post-metadata">

**Author:** ![Craig\_Tomison](https://avatars.discourse-cdn.com/v4/letter/c/3ec8ea/32.png) [@Craig\_Tomison](https://forum.inductiveautomation.com/u/Craig_Tomison)\
**Post date:** [June 28, 2013, 4:16am UTC](https://forum.inductiveautomation.com/t/analysis-contoller-and-run-analysis-provider-question/6775/2 "2013-06-28T04:16:25Z")

</div>

Bump!

I thought I cracked it but no luck.

---

<div class="post-metadata">

**Author:** ![Craig\_Tomison](https://avatars.discourse-cdn.com/v4/letter/c/3ec8ea/32.png) [@Craig\_Tomison](https://forum.inductiveautomation.com/u/Craig_Tomison)\
**Post date:** [June 28, 2013, 5:14am UTC](https://forum.inductiveautomation.com/t/analysis-contoller-and-run-analysis-provider-question/6775/3 "2013-06-28T05:14:51Z")

</div>

Figured it out.

In the filter I just had to enter ‘Cell Name=Machine 1, Cell Name=Machine 2, …’