# Analysis down chart incorrectly marking DT states as DT **URL:** \ **Category:** 3rd Party Modules\ **Created:** [November 12, 2013, 1:21am UTC](https://forum.inductiveautomation.com/t/analysis-down-chart-incorrectly-marking-dt-states-as-dt/7552 "2013-11-12T01:21:36Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![gekkoman](https://avatars.discourse-cdn.com/v4/letter/g/c89c15/32.png) [@gekkoman](https://forum.inductiveautomation.com/u/gekkoman)\ **Post date:** [November 12, 2013, 1:21am UTC](https://forum.inductiveautomation.com/t/analysis-down-chart-incorrectly-marking-dt-states-as-dt/7552/1 "2013-11-12T01:21:36Z")
I have a tag set up to highlight some differing run states on a palletiser in the production model. tag values 0 = stopped, do not record downtime 1= running, do not record downtime 2= running, accumulation full, do not record downtime 3= running, powersave, do not record downtime n= alarm states, record downtime In the downtime table this appears to work as advertised with things like state=3 not showing However if I use an Analysis time chart, states marked as “do not record downtime” show as downtime. Eg I mocked up a quick example The palletsiser in state=3 throughout - as you can see it does not show in the table, but shows incorrectly in the chart. Chart is a scheduled vs actual. Ignition is 7.6.3-rc2 (b2448), DB=postgres Am I doing something wrong? ---
**Author:** ![Pete.Low](https://avatars.discourse-cdn.com/v4/letter/p/f05b48/32.png) [@Pete.Low](https://forum.inductiveautomation.com/u/Pete.Low)\ **Post date:** [November 12, 2013, 3:43pm UTC](https://forum.inductiveautomation.com/t/analysis-down-chart-incorrectly-marking-dt-states-as-dt/7552/2 "2013-11-12T15:43:17Z")
Hi, The state should show as “Other Downtime” not the red unplanned downtime. The system sees any state other than 1 as down. If you record downtime and planned downtime are both un-marked then the event will not count against line downtime but the cell will still be considered as in a state other than running. So, I’m not certain why it is showing as red, unplanned downtime. Are there any console messages related to the palletizer? ---
**Author:** ![gekkoman](https://avatars.discourse-cdn.com/v4/letter/g/c89c15/32.png) [@gekkoman](https://forum.inductiveautomation.com/u/gekkoman)\ **Post date:** [November 13, 2013, 5:35am UTC](https://forum.inductiveautomation.com/t/analysis-down-chart-incorrectly-marking-dt-states-as-dt/7552/3 "2013-11-13T05:35:19Z")
Didn’t see any console messages that may explain. I have just modified my states for now to have it show properly. Thanks.