# Animation Glitch **URL:** \ **Category:** Ignition\ **Tags:** ignition79\ **Created:** [July 7, 2021, 12:31pm UTC](https://forum.inductiveautomation.com/t/animation-glitch/48568 "2021-07-07T12:31:31Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![jjguillenes](https://avatars.discourse-cdn.com/v4/letter/j/54ee81/32.png) [@jjguillenes](https://forum.inductiveautomation.com/u/jjguillenes)\ **Post date:** [July 7, 2021, 12:31pm UTC](https://forum.inductiveautomation.com/t/animation-glitch/48568/1 "2021-07-07T12:31:31Z")
Hello, yesterday i finished the windows i was working on but now i discover that my “rotating drum” keeps moving in the client(only published, not in the designer) while it rotates.ill show some SS. Any idea of what can produce this? ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/d/7/d7f135b8f59952f028a70797e62530279ac974bd.png) ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/8/5/85ace5e4e807ee53bb04300d0a677eafd1aee5f3.png) the rotation angle is binded to a timer.value , 360 bound and step by 15. ---
**Author:** ![jlandwerlen](https://avatars.discourse-cdn.com/v4/letter/j/bc8723/32.png) [@jlandwerlen](https://forum.inductiveautomation.com/u/jlandwerlen)\ **Post date:** [July 7, 2021, 12:37pm UTC](https://forum.inductiveautomation.com/t/animation-glitch/48568/2 "2021-07-07T12:37:55Z")
Maybe this thread will help, see last post. > [@Fans Float off Page after some time](http://forum.inductiveautomation.com/t/fans-float-off-page-after-some-time/34671): > > Hi there, I am having an issue with an animation I am doing of a fan spinning on some evaporators. I made it into a template. It works fine only problem is after some time the fans actually start to move off the spot and eventually just float off the screen. I am using the signal generator to get them to spin smoothly and have it set as ramp. If I go off the page and come back the fans go back to there spot. It was working fine on Ignition 7 but now on 8 it started doing it again. Anyone else e… ---
**Author:** ![jjguillenes](https://avatars.discourse-cdn.com/v4/letter/j/54ee81/32.png) [@jjguillenes](https://forum.inductiveautomation.com/u/jjguillenes)\ **Post date:** [July 8, 2021, 1:49pm UTC](https://forum.inductiveautomation.com/t/animation-glitch/48568/3 "2021-07-08T13:49:41Z")
thank you for the link, i found the solution before reading the thread just by making a template of the rotative element alone and then adding it to the full template, now it doesnt move, thanks anyway ill take that into consideration when i update to the 8.1 version