# Any Suggestions for software for building wireframes?

**URL:** <https://forum.inductiveautomation.com/t/any-suggestions-for-software-for-building-wireframes/114991>\
**Category:** General Discussion\
**Created:** [April 9, 2026, 8:38pm UTC](https://forum.inductiveautomation.com/t/any-suggestions-for-software-for-building-wireframes/114991 "2026-04-09T20:38:36Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![travisaggiebrown](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/travisaggiebrown/32/85824_2.png) [@travisaggiebrown](https://forum.inductiveautomation.com/u/travisaggiebrown)\
**Post date:** [April 9, 2026, 8:38pm UTC](https://forum.inductiveautomation.com/t/any-suggestions-for-software-for-building-wireframes/114991/1 "2026-04-09T20:38:36Z")

</div>

I’m hoping to get some recommendations for wireframing software.

Our Ignition dev team is pretty small, and we often spend a lot of time trying to figure out _what_ a new project is supposed to look like. Most requests focus heavily on functionality, but the layout and navigation are usually hard to explain verbally, which leads to a lot of back‑and‑forth.

I’m thinking that if our production team could wireframe their ideas—even at a basic level—it might help communicate expectations earlier and save time overall. Ideally, the tool would be simple enough for non‑technical users.

Has anyone here used wireframing tools successfully in a similar setup? Any suggestions would be greatly appreciated.

---

<div class="post-metadata">

**Author:** ![kvaneenennaam](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kvaneenennaam/32/81819_2.png) [@kvaneenennaam](https://forum.inductiveautomation.com/u/kvaneenennaam)\
**Post date:** [April 9, 2026, 9:20pm UTC](https://forum.inductiveautomation.com/t/any-suggestions-for-software-for-building-wireframes/114991/2 "2026-04-09T21:20:02Z")

</div>

[Figma](https://www.figma.com/) is the top of the line for this, start there and look for alternative options based on their competitors.

Although “simple enough for non-technical users” probably won’t overlap with the tools necessary to wireframe effectively, they end up being (in my opinion) a steep learning curve at the start but then payoff once you are familiar.

---

<div class="post-metadata">

**Author:** ![David\_Stone](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/david_stone/32/79749_2.png) [@David\_Stone](https://forum.inductiveautomation.com/u/David_Stone)\
**Post date:** [April 9, 2026, 10:35pm UTC](https://forum.inductiveautomation.com/t/any-suggestions-for-software-for-building-wireframes/114991/3 "2026-04-09T22:35:43Z")

</div>

> **[Stitch - Design with AI](https://stitch.withgoogle.com/)**
>
> Stitch generates UIs for mobile and web applications, making design ideation fast and easy.

Stitch for initial prototypes, then export to Figma. Heaps faster than starting from scratch.