# Arduino FPGA & Ignition

**URL:** <https://forum.inductiveautomation.com/t/arduino-fpga-ignition/28633>\
**Category:** Ignition\
**Created:** [September 28, 2019, 5:22am UTC](https://forum.inductiveautomation.com/t/arduino-fpga-ignition/28633 "2019-09-28T05:22:28Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Yfactor](https://avatars.discourse-cdn.com/v4/letter/y/e79b87/32.png) [@Yfactor](https://forum.inductiveautomation.com/u/Yfactor)\
**Post date:** [September 28, 2019, 5:22am UTC](https://forum.inductiveautomation.com/t/arduino-fpga-ignition/28633/1 "2019-09-28T05:22:28Z")

</div>

Hi there,  
It’s a very general question but how do I connect Arduino fpga with Ignition?  
e.g. Do I need a specific module drivers installed in Ignition etc?  
Is ignition OPC UA compatible or do we need a 3rd party OPC?

Cheers

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [September 28, 2019, 1:15pm UTC](https://forum.inductiveautomation.com/t/arduino-fpga-ignition/28633/2 "2019-09-28T13:15:42Z")

</div>

You would need a driver module or 3rd party OPC UA server. If it happens to speak Modbus you could use Ignition’s Modbus driver.

Without more information it’s tough to give you any more advice.