# Atcom ip01

**URL:** <https://forum.inductiveautomation.com/t/atcom-ip01/8366>\
**Category:** General Discussion\
**Created:** [April 25, 2014, 9:06am UTC](https://forum.inductiveautomation.com/t/atcom-ip01/8366 "2014-04-25T09:06:15Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![DNal](https://avatars.discourse-cdn.com/v4/letter/d/ba9def/32.png) [@DNal](https://forum.inductiveautomation.com/u/DNal)\
**Post date:** [April 25, 2014, 9:06am UTC](https://forum.inductiveautomation.com/t/atcom-ip01/8366/1 "2014-04-25T09:06:15Z")

</div>

Hi  
I’m trying to configure the ATCOM IP01 and I’m falling at the first hurdle. When I am logged into the device I cannot create a new analog trunk as this area is greyed out see attached screen grab.

---

<div class="post-metadata">

**Author:** ![DNal](https://avatars.discourse-cdn.com/v4/letter/d/ba9def/32.png) [@DNal](https://forum.inductiveautomation.com/u/DNal)\
**Post date:** [April 25, 2014, 11:06am UTC](https://forum.inductiveautomation.com/t/atcom-ip01/8366/2 "2014-04-25T11:06:55Z")

</div>

I believe I have the wrong type of ATCOM IP01 I have a FXS instead of a FXO.