# Automatic Start Run

**URL:** <https://forum.inductiveautomation.com/t/automatic-start-run/3315>\
**Category:** 3rd Party Modules\
**Created:** [September 21, 2011, 10:12pm UTC](https://forum.inductiveautomation.com/t/automatic-start-run/3315 "2011-09-21T22:12:45Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![jmoniz](https://avatars.discourse-cdn.com/v4/letter/j/5daacb/32.png) [@jmoniz](https://forum.inductiveautomation.com/u/jmoniz)\
**Post date:** [September 21, 2011, 10:12pm UTC](https://forum.inductiveautomation.com/t/automatic-start-run/3315/1 "2011-09-21T22:12:45Z")

</div>

I have All of my lines setup to start scheduled runs automatically. For some reason they will not start.

Does the previous run need to be completed first?

Thanks  
JP

---

<div class="post-metadata">

**Author:** ![thechtman](https://avatars.discourse-cdn.com/v4/letter/t/e56c9b/32.png) [@thechtman](https://forum.inductiveautomation.com/u/thechtman)\
**Post date:** [September 22, 2011, 6:18pm UTC](https://forum.inductiveautomation.com/t/automatic-start-run/3315/2 "2011-09-22T18:18:55Z")

</div>

If I’m understanding correctly, the Auto Start Schedule Entries checkbox is selected.

Then yes if a line is currently in a run, it will not start the new run.

A run will automatically stop at the time in the scheduled entry.

Do you have overlapped entries?

Tom

---

<div class="post-metadata">

**Author:** ![jmoniz](https://avatars.discourse-cdn.com/v4/letter/j/5daacb/32.png) [@jmoniz](https://forum.inductiveautomation.com/u/jmoniz)\
**Post date:** [September 22, 2011, 6:48pm UTC](https://forum.inductiveautomation.com/t/automatic-start-run/3315/3 "2011-09-22T18:48:22Z")

</div>

Tom,  
Yes the check boxes were selected.

Entries are not overlapped and Previous runs were stopped before the scheduled targets were met and befor the starting time of the next schedule entry.

Thanks  
JP

---

<div class="post-metadata">

**Author:** ![jmoniz](https://avatars.discourse-cdn.com/v4/letter/j/5daacb/32.png) [@jmoniz](https://forum.inductiveautomation.com/u/jmoniz)\
**Post date:** [September 28, 2011, 7:16pm UTC](https://forum.inductiveautomation.com/t/automatic-start-run/3315/4 "2011-09-28T19:16:33Z")

</div>

This issue was fixed by installing the latest module version. I was using the initial release.

Thanks to all for the help!!! 😆