# Automatic System Restore

**URL:** <https://forum.inductiveautomation.com/t/automatic-system-restore/4776>\
**Category:** Archived Topics\
**Created:** [July 5, 2012, 10:02pm UTC](https://forum.inductiveautomation.com/t/automatic-system-restore/4776 "2012-07-05T22:02:20Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![dpagnutti](https://avatars.discourse-cdn.com/v4/letter/d/ed655f/32.png) [@dpagnutti](https://forum.inductiveautomation.com/u/dpagnutti)\
**Post date:** [July 5, 2012, 10:02pm UTC](https://forum.inductiveautomation.com/t/automatic-system-restore/4776/1 "2012-07-05T22:02:20Z")

</div>

Hello,

Does anyone know if there’s a way to perform a system restore (\*.gwbk file) from a linux shell?

The idea is that we want to install the same setup on multiple servers with as little user input as possible (and potentially no internet connection).

---

<div class="post-metadata">

**Author:** ![Travis.Cox](https://avatars.discourse-cdn.com/v4/letter/t/b9bd4f/32.png) [@Travis.Cox](https://forum.inductiveautomation.com/u/Travis.Cox)\
**Post date:** [July 5, 2012, 10:51pm UTC](https://forum.inductiveautomation.com/t/automatic-system-restore/4776/2 "2012-07-05T22:51:04Z")

</div>

There is no way to do that right now. The most likely place we can add it is through the GCU (Gateway Control Utility). I will add a ticket in for that.