# Automation Direct ViewMarQ **URL:** \ **Category:** Ignition\ **Created:** [February 24, 2016, 4:41pm UTC](https://forum.inductiveautomation.com/t/automation-direct-viewmarq/11266 "2016-02-24T16:41:36Z")\ **Posts on this page:** 1\ **Showing post:** 7
**Author:** ![jkelleyus](https://avatars.discourse-cdn.com/v4/letter/j/3bc359/32.png) [@jkelleyus](https://forum.inductiveautomation.com/u/jkelleyus)\ **Post date:** [April 26, 2018, 5:24pm UTC](https://forum.inductiveautomation.com/t/automation-direct-viewmarq/11266/7 "2018-04-26T17:24:22Z")
Reviving an old thread here in hopes someone can help. We finally are trying a Viewmarq with Ignition via Modbus TPC and I’m having a hard time with the addressing and setup. I have an established connection on the gateway and set up a message on the Viewmarq; our first step was to try and write a variable but this isn’t working. We then went back and tried the example above (adopted for our device name) and still no joy. I’d really love to get this working. Tech support at both Inductive and Automation Direct have trued to be helpful, but it appears we’re in new territory with them. Any help greatly appreciated! Thanks!!! --- _[View the full topic](https://forum.inductiveautomation.com/t/automation-direct-viewmarq/11266)._