# Automation Professionals Driver Questions - Omron NJ **URL:** \ **Category:** 3rd Party Modules\ **Created:** [April 23, 2024, 5:34pm UTC](https://forum.inductiveautomation.com/t/automation-professionals-driver-questions-omron-nj/89310 "2024-04-23T17:34:38Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![Ben\_Davis](https://avatars.discourse-cdn.com/v4/letter/b/d2c977/32.png) [@Ben\_Davis](https://forum.inductiveautomation.com/u/Ben_Davis)\ **Post date:** [April 23, 2024, 5:34pm UTC](https://forum.inductiveautomation.com/t/automation-professionals-driver-questions-omron-nj/89310/1 "2024-04-23T17:34:38Z")
Alright, so a few questions on this, and I am new to using this driver, and am currently running in trial mode. We are connecting using the Class 3 generic EIP driver. ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/1/4/144924a22c575927ca396c5256fa58948896b072.png) First item, is that it seem like the connection is having trouble from time to time, and I am getting some connection rejection issues intermittently. ![ignition_3rdPArty5](https://us1.discourse-cdn.com/inductiveautomation/original/3X/a/a/aa1bffb202fd1aa8c5f12f8a5ed802dd0203d1a4.png) ![ignition_3rdPArty4](https://us1.discourse-cdn.com/inductiveautomation/original/3X/7/1/71b7dcee147ff7d1a1c1edad823245cb6bebf5fb.png) ---
**Author:** ![Ben\_Davis](https://avatars.discourse-cdn.com/v4/letter/b/d2c977/32.png) [@Ben\_Davis](https://forum.inductiveautomation.com/u/Ben_Davis)\ **Post date:** [April 23, 2024, 5:35pm UTC](https://forum.inductiveautomation.com/t/automation-professionals-driver-questions-omron-nj/89310/2 "2024-04-23T17:35:14Z")
Next, I have noticed that from the activating the OPC tags in the tag browser, vs the quick client, I get different results. The Quick client seems to grab the component arrays, but inside the tag browser I only see at the array level. ![ignition_3rdPArty6](https://us1.discourse-cdn.com/inductiveautomation/original/3X/d/c/dc578e21e366ac95131a6140dd2ed1057510bcfe.png) ![ignition_3rdPArty](https://us1.discourse-cdn.com/inductiveautomation/original/3X/1/0/10c9c6c5668daafe1d742aadcfca5e38497c6102.png) Also, I am seeing stability issues here too, I am unable to read/write (although it may be the connection instability) ![ignition_3rdPArty1](https://us1.discourse-cdn.com/inductiveautomation/original/3X/e/1/e1761bb22ca5f3bb4349697e1254aba6a3aa78e5.png) \*\*\*worthy of note, I may have had the IA driver turned on while doing this testing, as equipment was running. Not sure if that should have interfered, but thats why I am stating it. ---
**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\ **Post date:** [April 23, 2024, 5:54pm UTC](https://forum.inductiveautomation.com/t/automation-professionals-driver-questions-omron-nj/89310/3 "2024-04-23T17:54:07Z")
Notes: - My driver supports array tags in Ignition. The OPC browser will let you drag the array, and you get the array tag, or drag individual booleans to get a tag per each. - Booleans in the NJ are a horror show. Such that the application notes in the manual have very specific dos and don'ts for booleans and boolean arrays. (Basically, always embed in a CJ-style data type.) That said, failures to read global booleans is a bug, if that's really what's happening. If you are having connection issues that are causing my driver to reconnect, then your network is very likely broken. ---
**Author:** ![Ben\_Davis](https://avatars.discourse-cdn.com/v4/letter/b/d2c977/32.png) [@Ben\_Davis](https://forum.inductiveautomation.com/u/Ben_Davis)\ **Post date:** [April 24, 2024, 4:57pm UTC](https://forum.inductiveautomation.com/t/automation-professionals-driver-questions-omron-nj/89310/4 "2024-04-24T16:57:06Z")
Thanks. We are pulling out the Network Analyzer to run some tests. Will be back.