# Automation Professionals' EtherNet/IP Communication Suite V2 **URL:** \ **Category:** 3rd Party Modules\ **Tags:** ignition81\ **Created:** [January 3, 2023, 10:16pm UTC](https://forum.inductiveautomation.com/t/automation-professionals-ethernet-ip-communication-suite-v2/68190 "2023-01-03T22:16:54Z")\ **Posts on this page:** 1\ **Showing post:** 49
**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\ **Post date:** [March 29, 2023, 10:21pm UTC](https://forum.inductiveautomation.com/t/automation-professionals-ethernet-ip-communication-suite-v2/68190/49 "2023-03-29T22:21:43Z")
Another ~~couple weeks~~ _month_, ~~another beta~~ **a release candidate** : ~~v2.0.3.230882157~~ { Can you tell I spent time on vacation? } Key items: - Boolean breakage fix. - Large packet slow response handling fix. - Further memory usage optimizations. - Regression fixes for Class 1 drivers. - Updated the manual. Including additional usage notes for Rockwell AOIs. One of the rabbit holes I went down was some Function Block diagram code in a sample AOI from a tester. It turns out that some function block instructions have unreadable members--which makes it **impossible** to optimize the AOI they are embedded within. Ugh. Just say no to Function Block Diagrams (in AOIs). The slow response handling issue was triggered by stalls on my L81E's class 3 comms processor under very high load. A couple seconds at a time on all concurrent buffers. Somewhat improved with firmware v33+ over v32, but still there. Prior to this fix, it would trigger a pathological disconnect/reconnect cycle. If installing over prior betas, be sure to restart the gateway. There are changes to the localization files, and those don't update until restarted. --- _[View the full topic](https://forum.inductiveautomation.com/t/automation-professionals-ethernet-ip-communication-suite-v2/68190)._