# AutomationDirect Clic Plus OPC Device driver with Ethernet/IP **URL:** \ **Category:** General Discussion\ **Created:** [April 17, 2023, 3:06pm UTC](https://forum.inductiveautomation.com/t/automationdirect-clic-plus-opc-device-driver-with-ethernet-ip/72533 "2023-04-17T15:06:28Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![Marcus\_Sternberg](https://avatars.discourse-cdn.com/v4/letter/m/3d9bf3/32.png) [@Marcus\_Sternberg](https://forum.inductiveautomation.com/u/Marcus_Sternberg)\ **Post date:** [April 17, 2023, 3:06pm UTC](https://forum.inductiveautomation.com/t/automationdirect-clic-plus-opc-device-driver-with-ethernet-ip/72533/1 "2023-04-17T15:06:28Z")
I have observed threads stating people are successful with connecting to the AutomationDirect Clic Plus PLCs over ModbusTCP. Has anyone been successful on a device driver using Ethernet/IP. If so, which OPC device driver are you using? ---
**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\ **Post date:** [April 17, 2023, 3:12pm UTC](https://forum.inductiveautomation.com/t/automationdirect-clic-plus-opc-device-driver-with-ethernet-ip/72533/2 "2023-04-17T15:12:11Z")
If this is possible at all it would only be with one of @pturmel's EtherNet/IP drivers. The IA drivers are specific to a device model, not generic ENIP. ---
**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\ **Post date:** [April 17, 2023, 5:51pm UTC](https://forum.inductiveautomation.com/t/automationdirect-clic-plus-opc-device-driver-with-ethernet-ip/72533/3 "2023-04-17T17:51:31Z")
I don't believe the Click models support EtherNet/IP. The Productivity series **does** support it, but only as Class 1 I/O traffic. Not as any kind of tag memory access. ---
**Author:** ![Felipe\_CRM](https://avatars.discourse-cdn.com/v4/letter/f/dfb087/32.png) [@Felipe\_CRM](https://forum.inductiveautomation.com/u/Felipe_CRM)\ **Post date:** [April 17, 2023, 6:21pm UTC](https://forum.inductiveautomation.com/t/automationdirect-clic-plus-opc-device-driver-with-ethernet-ip/72533/4 "2023-04-17T18:21:13Z")
It seems the newer Click Plus line does support Ethernet/IP in addition to Modbus, according to their marketing material. Probably would need the custom Ethernet/IP module, at which point [this manual page](https://www.automationdirect.com/microsites/clickplcs/click-help/click_help.htm#233.htm?TocPath=Setup%257CCom%2520Port%25201%2520(Ethernet)%2520Setup%257CEtherNet%252FIP%257C _____ 1) has the Ethernet/IP connection parameters. ---
**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\ **Post date:** [April 17, 2023, 7:22pm UTC](https://forum.inductiveautomation.com/t/automationdirect-clic-plus-opc-device-driver-with-ethernet-ip/72533/5 "2023-04-17T19:22:39Z")
> [@Felipe\_CRM](#): > > does support Ethernet/IP I stand corrected. My module's Scanner mode could make two connections, each with 500 bytes of input and 500 bytes of output. ---
**Author:** ![Marcus\_Sternberg](https://avatars.discourse-cdn.com/v4/letter/m/3d9bf3/32.png) [@Marcus\_Sternberg](https://forum.inductiveautomation.com/u/Marcus_Sternberg)\ **Post date:** [April 17, 2023, 8:49pm UTC](https://forum.inductiveautomation.com/t/automationdirect-clic-plus-opc-device-driver-with-ethernet-ip/72533/6 "2023-04-17T20:49:35Z")
Thanks everyone. This is my hunch what would happen.