# B&R Automation

**URL:** <https://forum.inductiveautomation.com/t/b-r-automation/8920>\
**Category:** General Discussion\
**Created:** [August 19, 2014, 2:14am UTC](https://forum.inductiveautomation.com/t/b-r-automation/8920 "2014-08-19T02:14:22Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![SWilkerson](https://avatars.discourse-cdn.com/v4/letter/s/ea666f/32.png) [@SWilkerson](https://forum.inductiveautomation.com/u/SWilkerson)\
**Post date:** [August 19, 2014, 2:14am UTC](https://forum.inductiveautomation.com/t/b-r-automation/8920/1 "2014-08-19T02:14:22Z")

</div>

I’m wondering if anyone has ever used Ignition with B&R products. I have seen it is possible to use it with Beckhoff but I did not see anything re B&R.

Thanks for any information/responses!

---

<div class="post-metadata">

**Author:** ![JordanCClark](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jordancclark/32/83362_2.png) [@JordanCClark](https://forum.inductiveautomation.com/u/JordanCClark)\
**Post date:** [August 19, 2014, 9:34am UTC](https://forum.inductiveautomation.com/t/b-r-automation/8920/2 "2014-08-19T09:34:43Z")

</div>

Hi!

Here’s a thread relating to your topic:

[http://inductiveautomation.com/forum/viewtopic.php?f=72&t=8292](http://inductiveautomation.com/forum/viewtopic.php?f=72&t=8292)

Also, didn’t I read somewhere that B&R have OPC-UA builtin?