# B&R controllers

**URL:** <https://forum.inductiveautomation.com/t/b-r-controllers/24707>\
**Category:** General Discussion\
**Created:** [May 6, 2019, 7:22pm UTC](https://forum.inductiveautomation.com/t/b-r-controllers/24707 "2019-05-06T19:22:49Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![juliorosales](https://avatars.discourse-cdn.com/v4/letter/j/a88e57/32.png) [@juliorosales](https://forum.inductiveautomation.com/u/juliorosales)\
**Post date:** [May 6, 2019, 7:22pm UTC](https://forum.inductiveautomation.com/t/b-r-controllers/24707/1 "2019-05-06T19:22:49Z")

</div>

Has anybody tried to use B&R OPC monitor in conjunction with PVI monitor (software from B&R)? I am currently reading data from my OPC monitor (B&R) and installed the OPC-DA COM module in ignition, my module status is connected, but cannot pull any data from the B&R controller. any ideas?