# BACnet IP drive - Router

**URL:** <https://forum.inductiveautomation.com/t/bacnet-ip-drive-router/78406>\
**Category:** Ignition\
**Created:** [August 25, 2023, 5:56pm UTC](https://forum.inductiveautomation.com/t/bacnet-ip-drive-router/78406 "2023-08-25T17:56:50Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Luis\_Perez1](https://avatars.discourse-cdn.com/v4/letter/l/b3f665/32.png) [@Luis\_Perez1](https://forum.inductiveautomation.com/u/Luis_Perez1)\
**Post date:** [August 25, 2023, 5:56pm UTC](https://forum.inductiveautomation.com/t/bacnet-ip-drive-router/78406/1 "2023-08-25T17:56:50Z")

</div>

hello.  
I was using the BACnet IP driver in Kepware to communicate to our HVAC system. We use a BAS router from BACnet IP to MSTP and it worked perfect. Now we switched to using the Ignition BACnet IP driver and I can configure the BACnet to MSTP, and can see the router but not the HVAC controller.

I need assistance being able to configure the gateway to passthrough to the MSTP network.

Please advice.

thank you,