# Banner Wireless Gateway

**URL:** <https://forum.inductiveautomation.com/t/banner-wireless-gateway/112243>\
**Category:** Ignition\
**Created:** [November 17, 2025, 8:54pm UTC](https://forum.inductiveautomation.com/t/banner-wireless-gateway/112243 "2025-11-17T20:54:31Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Kyle\_Young](https://avatars.discourse-cdn.com/v4/letter/k/d2c977/32.png) [@Kyle\_Young](https://forum.inductiveautomation.com/u/Kyle_Young)\
**Post date:** [November 17, 2025, 8:54pm UTC](https://forum.inductiveautomation.com/t/banner-wireless-gateway/112243/1 "2025-11-17T20:54:31Z")

</div>

Hello,

I have a Banner DXM700-B1R1 Banner Gateway for receiving wireless signals from devices in the field. We have it elsewhere in the plant but it uses a Rockwell PLC to read in the data with a EDS file. Has anyone ever pulled the raw ethernet data into ignition to avoid using a PLC in this application? I have a Groov Rio to collect other data from old equipment in the area but am also in sure if I can pull in the raw ethernet data there either.

---

<div class="post-metadata">

**Author:** ![ryan.white](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/ryan.white/32/73193_2.png) [@ryan.white](https://forum.inductiveautomation.com/u/ryan.white)\
**Post date:** [November 17, 2025, 9:03pm UTC](https://forum.inductiveautomation.com/t/banner-wireless-gateway/112243/2 "2025-11-17T21:03:32Z")

</div>

> [@Kyle\_Young](#):
>
> data with a EDS file

If it behaves as an E/IP device, consider pturmel's Ethernet/IP driver, which supports behaving as a E/IP scanner device.

> [@Automation Professionals' EtherNet/IP Communication Suite V2](https://forum.inductiveautomation.com/t/automation-professionals-ethernet-ip-communication-suite-v2/68190):
>
> Automation Professionals is pleased to announce its latest EtherNet/IP Communications Suite driver module, a major upgrade to its EtherNet/IP Class1 Communications module, as a Public Beta. As of April 15, 2023, this is now a Production Release. The primary new feature is its new Generic EtherNet/IP Client Driver, a drop-in replacement for IA's Logix V21+ driver and its Omron NJ/NX driver. It does work with older Logix processors, and also works with Rockwell's MicroLogix 8xx family (ethernet…

---

<div class="post-metadata">

**Author:** ![tgarrison](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/tgarrison/32/80965_2.png) [@tgarrison](https://forum.inductiveautomation.com/u/tgarrison)\
**Post date:** [November 17, 2025, 9:05pm UTC](https://forum.inductiveautomation.com/t/banner-wireless-gateway/112243/3 "2025-11-17T21:05:21Z")

</div>

Yup, you can read them directly into Ignition using Modbus.