# Basic pipeline configuration

**URL:** <https://forum.inductiveautomation.com/t/basic-pipeline-configuration/6726>\
**Category:** Ignition\
**Created:** [June 18, 2013, 7:37pm UTC](https://forum.inductiveautomation.com/t/basic-pipeline-configuration/6726 "2013-06-18T19:37:14Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![scooterinmn](https://avatars.discourse-cdn.com/v4/letter/s/58956e/32.png) [@scooterinmn](https://forum.inductiveautomation.com/u/scooterinmn)\
**Post date:** [June 18, 2013, 7:37pm UTC](https://forum.inductiveautomation.com/t/basic-pipeline-configuration/6726/1 "2013-06-18T19:37:14Z")

</div>

I was wondering how to set up what seems to be a basic alarm notification pipeline and if it was possible with just one…

After an alarm is generated…  
-After a delay of X roster user 1 is notified  
-After a delay of X roster user 2 is notified  
-After a delay of X roster user 3 is notified (you get the idea until all users are notified)  
-After a delay of X roster user 1 is notified

-This basically repeats itself until the alarm is cleared or acknowledged. When it is, an alert is sent out to notify all users that the value has returned to normal.  
 ![:scratch:](https://us1.discourse-cdn.com/inductiveautomation/original/1X/76d1620bec252bfac07050c889ff5a91dc8a9c25.gif ":scratch:")

---

<div class="post-metadata">

**Author:** ![greg.simpson](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/greg.simpson/32/3135_2.png) [@greg.simpson](https://forum.inductiveautomation.com/u/greg.simpson)\
**Post date:** [July 12, 2013, 5:16pm UTC](https://forum.inductiveautomation.com/t/basic-pipeline-configuration/6726/2 "2013-07-12T17:16:53Z")

</div>

You will need to create 3 on-call rosters. After this is done, have each one of your 3 notification blocks look at a different on-call roster based on who you want notified at that point of the pipeline.