# Beckhoff STRUCT/UDT Configuration Issue

**URL:** <https://forum.inductiveautomation.com/t/beckhoff-struct-udt-configuration-issue/53337>\
**Category:** Ignition\
**Created:** [November 22, 2021, 1:49pm UTC](https://forum.inductiveautomation.com/t/beckhoff-struct-udt-configuration-issue/53337 "2021-11-22T13:49:08Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [November 22, 2021, 2:37pm UTC](https://forum.inductiveautomation.com/t/beckhoff-struct-udt-configuration-issue/53337/5 "2021-11-22T14:37:50Z")

</div>

If you do stick with pulling in the structured tag, there’s a strategy described [in this post](https://forum.inductiveautomation.com/t/opc-ua-struct-data-type/26905/2)  
(and elsewhere) for pulling members into their own tags if needed.

---

_[View the full topic](https://forum.inductiveautomation.com/t/beckhoff-struct-udt-configuration-issue/53337)._