# Best Way to Learn Ignition for Small Projects **URL:** \ **Category:** General Discussion\ **Tags:** demoproject, vision, perspective\ **Created:** [October 22, 2025, 6:46am UTC](https://forum.inductiveautomation.com/t/best-way-to-learn-ignition-for-small-projects/111638 "2025-10-22T06:46:07Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![zoee61355](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/zoee61355/32/80378_2.png) [@zoee61355](https://forum.inductiveautomation.com/u/zoee61355)\ **Post date:** [October 22, 2025, 6:46am UTC](https://forum.inductiveautomation.com/t/best-way-to-learn-ignition-for-small-projects/111638/1 "2025-10-22T06:46:07Z")
Hi everyone, I’m new to Ignition and just getting started. I want to build some small automation projects at home/work, but I’m not sure the best way to **learn Ignition quickly and effectively**. Should I start with **Vision** , **Perspective** , or both? Are there any **tutorials, courses, or sample projects** you recommend? Thanks in advance for your help! ---
**Author:** ![paul-griffith](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/paul-griffith/32/37249_2.png) [@paul-griffith](https://forum.inductiveautomation.com/u/paul-griffith)\ **Post date:** [October 22, 2025, 2:43pm UTC](https://forum.inductiveautomation.com/t/best-way-to-learn-ignition-for-small-projects/111638/2 "2025-10-22T14:43:12Z")
For the OP, you're giving off strong bot signals, but have just enough of an air of legitimacy I'll give you the benefit of the doubt in case there's a real human under there. For the community, from the backend this user seems legitimate or at least a much higher effort bot. There are also some _negative_ patterns, but no actual spam (so far) so I'm allowing the account to continue to exist - but feel free to engage (or not) with this thread under that advisement. ---
**Author:** ![Matrix\_Engineering](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/matrix_engineering/32/19781_2.png) [@Matrix\_Engineering](https://forum.inductiveautomation.com/u/Matrix_Engineering)\ **Post date:** [October 22, 2025, 2:51pm UTC](https://forum.inductiveautomation.com/t/best-way-to-learn-ignition-for-small-projects/111638/3 "2025-10-22T14:51:19Z")
> [@zoee61355](#): > > small automation projects at home Maker edition is free for home use, but is perspective only. > [@zoee61355](#): > > Are there any **tutorials, courses,** Inductive University ---
**Author:** ![robertm](https://avatars.discourse-cdn.com/v4/letter/r/ea5d25/32.png) [@robertm](https://forum.inductiveautomation.com/u/robertm)\ **Post date:** [October 22, 2025, 3:38pm UTC](https://forum.inductiveautomation.com/t/best-way-to-learn-ignition-for-small-projects/111638/4 "2025-10-22T15:38:51Z")
I learn best by example, so go to induction resources and import a vision or perspective project and deconstruct it. Also begin watching the Ignition University videos. In regards to Vision or Perspective, depends on your needs and path forward. If you’re interested in traditional industrial HMI control, then likely vision. If you’re interested in mobile applications, then Perspective. Alot of gray area in between. For me, Perspective has a higher learning curve than Vision, as I'm a traditional controls engineer. Those with web or CS experience might find Perspective more intuitive. ---
**Author:** ![kvane](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kvane/32/22228_2.png) [@kvane](https://forum.inductiveautomation.com/u/kvane)\ **Post date:** [October 22, 2025, 3:58pm UTC](https://forum.inductiveautomation.com/t/best-way-to-learn-ignition-for-small-projects/111638/5 "2025-10-22T15:58:42Z")
You can find some human-friendly advice and resources for learning Ignition here: - [r/PLC: How to learn Ignition from scratch?](https://www.reddit.com/r/PLC/comments/1h304uj/my_take_on_how_to_learn_ignition_from_scratch/) ---
**Author:** ![Mirza\_Whiteley](https://avatars.discourse-cdn.com/v4/letter/m/c67d28/32.png) [@Mirza\_Whiteley](https://forum.inductiveautomation.com/u/Mirza_Whiteley)\ **Post date:** [October 23, 2025, 7:41am UTC](https://forum.inductiveautomation.com/t/best-way-to-learn-ignition-for-small-projects/111638/6 "2025-10-23T07:41:17Z")
Pretty detailed for the intro. Thanks. ---
**Author:** ![danielps1818](https://avatars.discourse-cdn.com/v4/letter/d/ecae2f/32.png) [@danielps1818](https://forum.inductiveautomation.com/u/danielps1818)\ **Post date:** [October 23, 2025, 8:57am UTC](https://forum.inductiveautomation.com/t/best-way-to-learn-ignition-for-small-projects/111638/7 "2025-10-23T08:57:19Z")
I trully recommend this post: > [@Do's and Don'ts when developing First Project with Ignition?](https://forum.inductiveautomation.com/t/dos-and-donts-when-developing-first-project-with-ignition/93592): > > Hi everyone, i am learning ignition to work on first project and want to know some tips/tricks to be careful while developing first project so i do it properly and organize tag structure, graphics etc in the proper way in my project ? thanks for all your help Regards, Mitesh. Really good advice there. ---
**Author:** ![Mirza\_Whiteley](https://avatars.discourse-cdn.com/v4/letter/m/c67d28/32.png) [@Mirza\_Whiteley](https://forum.inductiveautomation.com/u/Mirza_Whiteley)\ **Post date:** [October 23, 2025, 6:37pm UTC](https://forum.inductiveautomation.com/t/best-way-to-learn-ignition-for-small-projects/111638/8 "2025-10-23T18:37:09Z")
Thanks!