# Block Trasaction Groups and unfilled blocks

**URL:** <https://forum.inductiveautomation.com/t/block-trasaction-groups-and-unfilled-blocks/9317>\
**Category:** Ignition\
**Created:** [November 11, 2014, 6:15pm UTC](https://forum.inductiveautomation.com/t/block-trasaction-groups-and-unfilled-blocks/9317 "2014-11-11T18:15:00Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![JordanCClark](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jordancclark/32/83362_2.png) [@JordanCClark](https://forum.inductiveautomation.com/u/JordanCClark)\
**Post date:** [November 11, 2014, 6:15pm UTC](https://forum.inductiveautomation.com/t/block-trasaction-groups-and-unfilled-blocks/9317/1 "2014-11-11T18:15:00Z")

</div>

Didn’t a block TG fill in the blanks? In this instance, repeat the part numbers to fill the rest of the block?

 ![](https://us1.discourse-cdn.com/inductiveautomation/original/2X/0/0c2661da0a20bb6d7f74d147f90bc214a4420a96.PNG)

---

<div class="post-metadata">

**Author:** ![JordanCClark](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jordancclark/32/83362_2.png) [@JordanCClark](https://forum.inductiveautomation.com/u/JordanCClark)\
**Post date:** [November 11, 2014, 6:20pm UTC](https://forum.inductiveautomation.com/t/block-trasaction-groups-and-unfilled-blocks/9317/2 "2014-11-11T18:20:17Z")

</div>

All right, I was able to populate it through the Block View, but didn’t it use to populate the whole thing by default? I just don’t remember having to do that before… ![:scratch:](https://us1.discourse-cdn.com/inductiveautomation/original/1X/76d1620bec252bfac07050c889ff5a91dc8a9c25.gif ":scratch:")