# \[bug-13267\]Tag history issues

**URL:** <https://forum.inductiveautomation.com/t/bug-13267-tag-history-issues/23532>\
**Category:** Ignition Early Access\
**Created:** [March 21, 2019, 5:38pm UTC](https://forum.inductiveautomation.com/t/bug-13267-tag-history-issues/23532 "2019-03-21T17:38:16Z")\
**Posts on this page:** 1\
**Showing post:** 14

<div class="post-metadata">

**Author:** ![cwaddoups](https://avatars.discourse-cdn.com/v4/letter/c/43a26b/32.png) [@cwaddoups](https://forum.inductiveautomation.com/u/cwaddoups)\
**Post date:** [April 17, 2019, 1:24pm UTC](https://forum.inductiveautomation.com/t/bug-13267-tag-history-issues/23532/14 "2019-04-17T13:24:21Z")

</div>

That mirrors what we are seeing as well. It appears that it is working as expected then. I do have a couple other issues that I have seen in the past week with the 8.0.1 version I'm using. One I posted about on the forum and it doesn't have any responses yet. The link is below. The other issue that I have seen is on the gateway on my laptop I have a trial version of the gateway running, when I start the gateway in the morning the opc tags (which at this point the devices are not connected) show a status of bad\_trialExpired as expected. When I reset my trial they go to a status of bad\_UnknownPreviousValue, the only way I have found to clear this status is to disable/enable each tag or to restart the gateway. Either way the tag status goes to bad\_NotConnected which is what I would expect it to be once I reset the trial initially. I'm not sure if this behavior is expected or if it is a bug, but it seems off to me.

> [@Tag tree historical selected path and easy chart possible bug](http://forum.inductiveautomation.com/t/tag-tree-historical-selected-path-and-easy-chart-possible-bug/24184):
>
> I know that bug-13023 was fixed last week to populate the selected path in the tag tree when in historical mode, however the path that populates is in a significantly different format than the format in 7.9 and it does not seem to populate correctly when a tag is dragged and dropped onto an easy chart in historical mode. The selected path property in the tag tree reads as follows: 7.9 Path - [databaseName/gatewayName:providerName]tagpath 8.0 Path - histprov:databaseName:/drv:gatewayName:provi…

---

_[View the full topic](https://forum.inductiveautomation.com/t/bug-13267-tag-history-issues/23532)._
