# \[BUG-13815\] Popups overlays v8.0.2 **URL:** \ **Category:** Ignition\ **Created:** [August 7, 2019, 2:40pm UTC](https://forum.inductiveautomation.com/t/bug-13815-popups-overlays-v8-0-2/27231 "2019-08-07T14:40:23Z")\ **Posts on this page:** 1\ **Showing post:** 4
**Author:** ![awalker](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/awalker/32/6874_2.png) [@awalker](https://forum.inductiveautomation.com/u/awalker)\ **Post date:** [August 8, 2019, 5:48pm UTC](https://forum.inductiveautomation.com/t/bug-13815-popups-overlays-v8-0-2/27231/4 "2019-08-08T17:48:59Z")
@jlandwerlen Is the issue you are seeing similar to this? > [@\[BUG-13815\] After Ignition upgrade to 8.0, windows are loaded with tags in error state](http://forum.inductiveautomation.com/t/bug-13815-after-ignition-upgrade-to-8-0-windows-are-loaded-with-tags-in-error-state/25017): > > In ignition 8 vision windows are loaded quicker than in 7.9, but they show all the tags with error overlay for first second or so. This is more visible with windows with more tags. 7.9 loads the same window without the error overlays after it has been cached in first run. this looks bit nasty to the users, and especially when we load dialogs, it is very visible to end users. Here is a video showing the issue In the red debug block the multistate indicator is just d… --- _[View the full topic](https://forum.inductiveautomation.com/t/bug-13815-popups-overlays-v8-0-2/27231)._