# \[Bug-13958\]Perspective Linear Scale Span \< 1 does not work

**URL:** <https://forum.inductiveautomation.com/t/bug-13958-perspective-linear-scale-span-1-does-not-work/25171>\
**Category:** Ignition Early Access\
**Created:** [May 20, 2019, 8:07pm UTC](https://forum.inductiveautomation.com/t/bug-13958-perspective-linear-scale-span-1-does-not-work/25171 "2019-05-20T20:07:26Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![vcgasman](https://avatars.discourse-cdn.com/v4/letter/v/ecc23a/32.png) [@vcgasman](https://forum.inductiveautomation.com/u/vcgasman)\
**Post date:** [May 20, 2019, 8:07pm UTC](https://forum.inductiveautomation.com/t/bug-13958-perspective-linear-scale-span-1-does-not-work/25171/1 "2019-05-20T20:07:26Z")

</div>

I am using the Perspective Linear scale, latest available build (b2019052002). I have a min value of 0, max value of 10. Major ticks span property of 1 results in tick labels 0-10, one at each integer value. I want minor ticks at each 0.5 value, ie. 0.5, 1.5, 2.5, etc. A span of 0.5 does not work to add minor ticks less than a single integer value. Same applies for fine ticks (if I wanted them at 0.1 or 0.25).

---

<div class="post-metadata">

**Author:** ![awalker](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/awalker/32/6874_2.png) [@awalker](https://forum.inductiveautomation.com/u/awalker)\
**Post date:** [October 9, 2019, 4:16pm UTC](https://forum.inductiveautomation.com/t/bug-13958-perspective-linear-scale-span-1-does-not-work/25171/2 "2019-10-09T16:16:48Z")

</div>

This issue was fixed in the 8.0.6 nightly build that was uploaded today (10/9).