# \[BUG-13985\] Alarm Pipeline Jump

**URL:** <https://forum.inductiveautomation.com/t/bug-13985-alarm-pipeline-jump/25225>\
**Category:** Ignition Early Access\
**Created:** [May 22, 2019, 11:58am UTC](https://forum.inductiveautomation.com/t/bug-13985-alarm-pipeline-jump/25225 "2019-05-22T11:58:06Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Tumeksi](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/tumeksi/32/4697_2.png) [@Tumeksi](https://forum.inductiveautomation.com/u/Tumeksi)\
**Post date:** [May 22, 2019, 11:58am UTC](https://forum.inductiveautomation.com/t/bug-13985-alarm-pipeline-jump/25225/1 "2019-05-22T11:58:06Z")

</div>

Hi,

I’m having a problem with the Pipeline Jump-block.  
The jump-block does not jump to a defined block when its activated.

The logs give out error:  
"Received event for unknown pipeline ‘project:alarm-pipelines:/pipeline:Pipeline01Critical’. "

When the pipeline goes active the logs say:  
ending alarm event ‘ca4b1bfb-ee8c-49be-bbff-9a3ae5bacf1d’ to pipeline ‘project:MainProject:/pipeline:Pipeline00Alarms’

The"'project:MainProject" is correct when the pipeline is activated but when the jump block activates it tries to go to " 'project:alarm-pipelines:" In the jump block there is no way to access this “project” setting.

How can i get this to work?  
Is there some place where i can set the pipeli “default” project, or is this a BUG?

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [May 22, 2019, 4:43pm UTC](https://forum.inductiveautomation.com/t/bug-13985-alarm-pipeline-jump/25225/2 "2019-05-22T16:43:43Z")

</div>

I think this is a bug, thank you for reporting.

---

<div class="post-metadata">

**Author:** ![awalker](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/awalker/32/6874_2.png) [@awalker](https://forum.inductiveautomation.com/u/awalker)\
**Post date:** [May 24, 2019, 4:24pm UTC](https://forum.inductiveautomation.com/t/bug-13985-alarm-pipeline-jump/25225/3 "2019-05-24T16:24:52Z")

</div>

This issue was fixed in the 8.0.3 nightly build that was uploaded today (5/24).