# \[BUG-14117\]Vision - Label Component Not Allowing Text Sizes Over 100pt

**URL:** <https://forum.inductiveautomation.com/t/bug-14117-vision-label-component-not-allowing-text-sizes-over-100pt/25589>\
**Category:** Ignition Early Access\
**Created:** [June 5, 2019, 7:13pm UTC](https://forum.inductiveautomation.com/t/bug-14117-vision-label-component-not-allowing-text-sizes-over-100pt/25589 "2019-06-05T19:13:50Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![aburgess](https://avatars.discourse-cdn.com/v4/letter/a/3ec8ea/32.png) [@aburgess](https://forum.inductiveautomation.com/u/aburgess)\
**Post date:** [June 5, 2019, 7:13pm UTC](https://forum.inductiveautomation.com/t/bug-14117-vision-label-component-not-allowing-text-sizes-over-100pt/25589/1 "2019-06-05T19:13:50Z")

</div>

Upgrading from 7.9 to 8.0.1, I had a couple of templates in Vision that had label components with the text size set to 200pt (large timers designed to be shown on dedicated TVs). In troubleshooting some text resizing issues on Ubuntu clients, I found that I was unable to adjust the font size on the label component in question. When I created a new label, I was able to adjust the font size, but it will not allow any values over 100pt.

Is this an intentional change?

---

<div class="post-metadata">

**Author:** ![KathyApplebaum](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kathyapplebaum/32/7261_2.png) [@KathyApplebaum](https://forum.inductiveautomation.com/u/KathyApplebaum)\
**Post date:** [June 5, 2019, 8:24pm UTC](https://forum.inductiveautomation.com/t/bug-14117-vision-label-component-not-allowing-text-sizes-over-100pt/25589/3 "2019-06-05T20:24:35Z")

</div>

Looks like it's an unintentional regression from another ticket. I'll file a bug report on this. Thanks for catching it!

EDIT: Fixed in 8.0.15:

> [@\[bug-14117\]Unable to select font size greater than 100](http://forum.inductiveautomation.com/t/bug-14117-unable-to-select-font-size-greater-than-100/31658/6):
>
> This is on existing clients where the fonts / kerning changed with the new Java. I only needed to reduce the font size a bit, but the upper limit precluded it. Pretty much.

---

<div class="post-metadata">

**Author:** ![aburgess](https://avatars.discourse-cdn.com/v4/letter/a/3ec8ea/32.png) [@aburgess](https://forum.inductiveautomation.com/u/aburgess)\
**Post date:** [June 5, 2019, 8:36pm UTC](https://forum.inductiveautomation.com/t/bug-14117-vision-label-component-not-allowing-text-sizes-over-100pt/25589/4 "2019-06-05T20:36:15Z")

</div>

Good to know that I’m not going crazy.

Thanks Kathy!