# \[bug-14313\]Direct Tag Group running on Leased/Driven rate

**URL:** <https://forum.inductiveautomation.com/t/bug-14313-direct-tag-group-running-on-leased-driven-rate/27158>\
**Category:** Ignition Early Access\
**Created:** [August 5, 2019, 12:51pm UTC](https://forum.inductiveautomation.com/t/bug-14313-direct-tag-group-running-on-leased-driven-rate/27158 "2019-08-05T12:51:15Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![DaveD24](https://avatars.discourse-cdn.com/v4/letter/d/8edcca/32.png) [@DaveD24](https://forum.inductiveautomation.com/u/DaveD24)\
**Post date:** [August 5, 2019, 12:51pm UTC](https://forum.inductiveautomation.com/t/bug-14313-direct-tag-group-running-on-leased-driven-rate/27158/1 "2019-08-05T12:51:15Z")

</div>

After upgrading a small project from 7.9 to 8.0, I had some issues with serial communication errors in the gateway log, on closer inspection I found the OPC rate was the default 1,000ms not the 20,000ms we had set in the Direct Rate field for these tags, but selecting Mode=Leased and set the Leased Rate to 20,000ms, then re-select Mode=Direct and save, the OPC rate is then 20,000 as expected, also I found that changing the Mode to Leased save and then reset the Mode to Direct and save leaving the Leased Rate @ 1,000ms the Direct Rate is then used 😕

After flipping all the affected TagGroups to Leased and back to Direct the project is now working, as I have not been able to replicate this on a clean 8.0 install I suspect this may be due to the import process, has anyone else seen this type of behavior?

---

<div class="post-metadata">

**Author:** ![jlivingston](https://avatars.discourse-cdn.com/v4/letter/j/779978/32.png) [@jlivingston](https://forum.inductiveautomation.com/u/jlivingston)\
**Post date:** [August 5, 2019, 3:34pm UTC](https://forum.inductiveautomation.com/t/bug-14313-direct-tag-group-running-on-leased-driven-rate/27158/2 "2019-08-05T15:34:46Z")

</div>

Years ago there were other serial interface users looking for a repair to the system at Ignition 7.9, and there should be a colon here yet the forum text editor wants to make an emoji of it...

> [@System.serial UnsatisfiedLinkError (missing library?)](http://forum.inductiveautomation.com/t/system-serial-unsatisfiedlinkerror-missing-library/4913):
>
> Fresh install of Ignition 7.5.1, added the following modules: Serial Support Client 1.5.1 (b29) Serial Support Gateway 1.5.1 (b29) Created a button and added the following: system.serial.openSerialPort('/dev/ttyUSB0') Pressing the button results in the following: ERROR [ActionAdapter-AWT-EventQueue-0] \<HTML\>Error executing script for event:&nbsp;\<code\>\<b\>actionPerformed\</b\>\</code\>\<BR\>on component:&nbsp;\<code\>\<b\>Button\</b\>\</code\>. Traceback (most recent call last): File "\<event:actionPerfo…

So you might see if the users with known serial problems earlier have seen it under upgrade, or go to [https://support.inductiveautomation.com](https://support.inductiveautomation.com) and either check the knowledgebase, or (if you have not already done so) check the support policies before a voice call or e-mail.. Thanks for telling us what you have seen thus far. Inquiring minds ( and new students ) always wish to know.

---

<div class="post-metadata">

**Author:** ![paul-griffith](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/paul-griffith/32/37249_2.png) [@paul-griffith](https://forum.inductiveautomation.com/u/paul-griffith)\
**Post date:** [August 5, 2019, 3:45pm UTC](https://forum.inductiveautomation.com/t/bug-14313-direct-tag-group-running-on-leased-driven-rate/27158/3 "2019-08-05T15:45:06Z")

</div>

There’s an active fix up for review that fixes a lot of problems with tag group rates not properly updating. I’ll add you on to that ticket, and we should post back here once it gets merged in to a nightly build.

---

<div class="post-metadata">

**Author:** ![awalker](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/awalker/32/6874_2.png) [@awalker](https://forum.inductiveautomation.com/u/awalker)\
**Post date:** [August 21, 2019, 3:29pm UTC](https://forum.inductiveautomation.com/t/bug-14313-direct-tag-group-running-on-leased-driven-rate/27158/4 "2019-08-21T15:29:52Z")

</div>

This issue was fixed in the 8.0.4 nightly build that was uploaded today (8/21)