# \[BUG-14721\] Perspective Nudging Changes Coordinates on Both Axis

**URL:** <https://forum.inductiveautomation.com/t/bug-14721-perspective-nudging-changes-coordinates-on-both-axis/25297>\
**Category:** Ignition Early Access\
**Created:** [May 24, 2019, 1:39pm UTC](https://forum.inductiveautomation.com/t/bug-14721-perspective-nudging-changes-coordinates-on-both-axis/25297 "2019-05-24T13:39:49Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![vcgasman](https://avatars.discourse-cdn.com/v4/letter/v/ecc23a/32.png) [@vcgasman](https://forum.inductiveautomation.com/u/vcgasman)\
**Post date:** [May 24, 2019, 1:39pm UTC](https://forum.inductiveautomation.com/t/bug-14721-perspective-nudging-changes-coordinates-on-both-axis/25297/1 "2019-05-24T13:39:49Z")

</div>

I have a label component with x=1340 and y=400 coordinates in a coordinate container. I hold the down arrow key to nudge the component. By the time my y value =600.033977509, my x value has also changed to 1333.854225159. The x value should not change. The same behavior exists when nudging left or right…the y value changes.

---

<div class="post-metadata">

**Author:** ![osolorzano](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/osolorzano/32/6432_2.png) [@osolorzano](https://forum.inductiveautomation.com/u/osolorzano)\
**Post date:** [May 24, 2019, 5:32pm UTC](https://forum.inductiveautomation.com/t/bug-14721-perspective-nudging-changes-coordinates-on-both-axis/25297/2 "2019-05-24T17:32:59Z")

</div>

Does your coordinate container have a border on it and/or does your label have any rotation on it at all?

---

<div class="post-metadata">

**Author:** ![vcgasman](https://avatars.discourse-cdn.com/v4/letter/v/ecc23a/32.png) [@vcgasman](https://forum.inductiveautomation.com/u/vcgasman)\
**Post date:** [May 24, 2019, 5:54pm UTC](https://forum.inductiveautomation.com/t/bug-14721-perspective-nudging-changes-coordinates-on-both-axis/25297/3 "2019-05-24T17:54:50Z")

</div>

No border on the coordinate container and no rotation on the label. (I did post something about nudging rotated objects in a different post as well that Perry responded to)  
Interestingly enough, I can’t repeat this again right now…although I have seen this issue occur on multiple occasions. I’ll try to capture what else is going on when it happens again next.

---

<div class="post-metadata">

**Author:** ![vcgasman](https://avatars.discourse-cdn.com/v4/letter/v/ecc23a/32.png) [@vcgasman](https://forum.inductiveautomation.com/u/vcgasman)\
**Post date:** [July 15, 2019, 1:37pm UTC](https://forum.inductiveautomation.com/t/bug-14721-perspective-nudging-changes-coordinates-on-both-axis/25297/4 "2019-07-15T13:37:50Z")

</div>

This is still an issue. I have installed the nightly build from Thursday night. See attached. It happens with any object in that view and whether I select a group of objects or not. If I switch to a different view, the problem does not exist.  
https:/uploads/iatesting/original/2X/e/e25b07667b6fb719caae3b2fa03850b8e5edc16d.mp4

---

<div class="post-metadata">

**Author:** ![awalker](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/awalker/32/6874_2.png) [@awalker](https://forum.inductiveautomation.com/u/awalker)\
**Post date:** [August 13, 2019, 10:44pm UTC](https://forum.inductiveautomation.com/t/bug-14721-perspective-nudging-changes-coordinates-on-both-axis/25297/5 "2019-08-13T22:44:19Z")

</div>

Apologies for the delay, I have created a ticket for someone to look in to this and will update you when I have more information.