# \[Bug-1543\]Toggle Switch Word Wrap

**URL:** <https://forum.inductiveautomation.com/t/bug-1543-toggle-switch-word-wrap/42165>\
**Category:** Ignition Early Access\
**Tags:** perspective\
**Created:** [January 12, 2021, 4:56pm UTC](https://forum.inductiveautomation.com/t/bug-1543-toggle-switch-word-wrap/42165 "2021-01-12T16:56:13Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![apgilber](https://avatars.discourse-cdn.com/v4/letter/a/eb9ed0/32.png) [@apgilber](https://forum.inductiveautomation.com/u/apgilber)\
**Post date:** [January 12, 2021, 4:56pm UTC](https://forum.inductiveautomation.com/t/bug-1543-toggle-switch-word-wrap/42165/1 "2021-01-12T16:56:14Z")

</div>

Is it possible to get more than 1 line of text on a Toggle Switch? When translating this text on the toggle it gets a bit long and requires two lines but no combination of word wrap settings is getting it to display properly without making the toggle switch as wide as is needed for a single line.

![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/e/3/e38e0a6a81d10970ba7512298c0dd5b66001bd98.png)

---

<div class="post-metadata">

**Author:** ![cmallonee](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/cmallonee/32/6416_2.png) [@cmallonee](https://forum.inductiveautomation.com/u/cmallonee)\
**Post date:** [January 12, 2021, 5:25pm UTC](https://forum.inductiveautomation.com/t/bug-1543-toggle-switch-word-wrap/42165/2 "2021-01-12T17:25:53Z")

</div>

I’ve opened an internal ticket to address this, as well as a second ticket to address the fact that applying overflow at the internal label and component levels does not allow for displaying the text - even if out-of-position.