# \[BUG-506\] 8.1.0 RC1 Output parameters in flex repeaters

**URL:** <https://forum.inductiveautomation.com/t/bug-506-8-1-0-rc1-output-parameters-in-flex-repeaters/39073>\
**Category:** Ignition Early Access\
**Tags:** perspective\
**Created:** [September 25, 2020, 5:02pm UTC](https://forum.inductiveautomation.com/t/bug-506-8-1-0-rc1-output-parameters-in-flex-repeaters/39073 "2020-09-25T17:02:03Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![jpark](https://avatars.discourse-cdn.com/v4/letter/j/a88e57/32.png) [@jpark](https://forum.inductiveautomation.com/u/jpark)\
**Post date:** [September 25, 2020, 5:02pm UTC](https://forum.inductiveautomation.com/t/bug-506-8-1-0-rc1-output-parameters-in-flex-repeaters/39073/1 "2020-09-25T17:02:03Z")

</div>

It looks like Output parameters don’t work when a view is used in a flex repeater.  
When the same view is used in an embededView, it works.

This also works as expected in 8.0.15

---

<div class="post-metadata">

**Author:** ![osolorzano](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/osolorzano/32/6432_2.png) [@osolorzano](https://forum.inductiveautomation.com/u/osolorzano)\
**Post date:** [September 25, 2020, 10:18pm UTC](https://forum.inductiveautomation.com/t/bug-506-8-1-0-rc1-output-parameters-in-flex-repeaters/39073/2 "2020-09-25T22:18:19Z")

</div>

This will be fixed before release of 8.1