# \[Bug\]-7098 Binding preview not showing after disconnecting/reconnecting designer **URL:** \ **Category:** Ignition\ **Tags:** ignition81, perspective\ **Created:** [January 19, 2023, 9:19am UTC](https://forum.inductiveautomation.com/t/bug-7098-binding-preview-not-showing-after-disconnecting-reconnecting-designer/68779 "2023-01-19T09:19:54Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![Willem\_Ver\_Eecke](https://avatars.discourse-cdn.com/v4/letter/w/a4c791/32.png) [@Willem\_Ver\_Eecke](https://forum.inductiveautomation.com/u/Willem_Ver_Eecke)\ **Post date:** [January 19, 2023, 9:19am UTC](https://forum.inductiveautomation.com/t/bug-7098-binding-preview-not-showing-after-disconnecting-reconnecting-designer/68779/1 "2023-01-19T09:19:54Z")
We use Ignition 8.1.24 where the disconnecting issue after network error has been resolved (see [Release notes](https://forum.inductiveautomation.com/t/nightly-8-1-changelogs-2022/54636/174)). However we encounter in the designer that the binding preview does not work anymore after the reconnect. 1. Before disconnecting: 2. Disconnecting 3. After reconnection 4. To work around this issue we must close the view and reopen the view ---
**Author:** ![Sfenwick](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/sfenwick/32/82355_2.png) [@Sfenwick](https://forum.inductiveautomation.com/u/Sfenwick)\ **Post date:** [January 19, 2023, 6:23pm UTC](https://forum.inductiveautomation.com/t/bug-7098-binding-preview-not-showing-after-disconnecting-reconnecting-designer/68779/2 "2023-01-19T18:23:02Z")
Thank you for bringing this to our attention! We're looking into this and will report back. Thanks ---
**Author:** ![Sfenwick](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/sfenwick/32/82355_2.png) [@Sfenwick](https://forum.inductiveautomation.com/u/Sfenwick)\ **Post date:** [January 19, 2023, 8:27pm UTC](https://forum.inductiveautomation.com/t/bug-7098-binding-preview-not-showing-after-disconnecting-reconnecting-designer/68779/3 "2023-01-19T20:27:54Z")
I've been trying to recreate the issue and seem to be getting a different result. Could you please clarify on a couple points? -Is the Identity provider setup and you're using the new Auth token to maintain the designer, is that right? -If so, what do you have for the "Inactivity Timeout" & "Time-To-Live (TTL)" set? Thanks in advance! ---
**Author:** ![Willem\_Ver\_Eecke](https://avatars.discourse-cdn.com/v4/letter/w/a4c791/32.png) [@Willem\_Ver\_Eecke](https://forum.inductiveautomation.com/u/Willem_Ver_Eecke)\ **Post date:** [January 20, 2023, 9:06am UTC](https://forum.inductiveautomation.com/t/bug-7098-binding-preview-not-showing-after-disconnecting-reconnecting-designer/68779/4 "2023-01-20T09:06:33Z")
- Yes, we updated to 8.1.24 and our Identity Provider changed to these settings. - Session Inactivity timeout is 30 minutes, I assume with TTL you mean ‘Session Expiration’, which is max lifetime| ---
**Author:** ![Sfenwick](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/sfenwick/32/82355_2.png) [@Sfenwick](https://forum.inductiveautomation.com/u/Sfenwick)\ **Post date:** [January 20, 2023, 9:28pm UTC](https://forum.inductiveautomation.com/t/bug-7098-binding-preview-not-showing-after-disconnecting-reconnecting-designer/68779/5 "2023-01-20T21:28:37Z")
Thanks again for that additional information! I'm going to try mirroring your settings and see what I can discover. I'll report back with my findings when I can. Thanks ---
**Author:** ![Sfenwick](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/sfenwick/32/82355_2.png) [@Sfenwick](https://forum.inductiveautomation.com/u/Sfenwick)\ **Post date:** [January 23, 2023, 8:35pm UTC](https://forum.inductiveautomation.com/t/bug-7098-binding-preview-not-showing-after-disconnecting-reconnecting-designer/68779/6 "2023-01-23T20:35:59Z")
Sorry for the delay, but can you show me how this is set on your side? I think this is the missing piece for our disconnect as to why I'm getting a different results. ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/7/f/7fa61cc34fa456350eabaf125299c4c2eacf774f.png) ---
**Author:** ![Willem\_Ver\_Eecke](https://avatars.discourse-cdn.com/v4/letter/w/a4c791/32.png) [@Willem\_Ver\_Eecke](https://forum.inductiveautomation.com/u/Willem_Ver_Eecke)\ **Post date:** [January 24, 2023, 12:07pm UTC](https://forum.inductiveautomation.com/t/bug-7098-binding-preview-not-showing-after-disconnecting-reconnecting-designer/68779/7 "2023-01-24T12:07:07Z")
This is our setup: ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/e/c/ec52cab95bafedda6e0091e80333a1a82d8775d7.png) ---
**Author:** ![Sfenwick](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/sfenwick/32/82355_2.png) [@Sfenwick](https://forum.inductiveautomation.com/u/Sfenwick)\ **Post date:** [January 24, 2023, 5:23pm UTC](https://forum.inductiveautomation.com/t/bug-7098-binding-preview-not-showing-after-disconnecting-reconnecting-designer/68779/8 "2023-01-24T17:23:04Z")
Thanks again for that information! I was able to reproduce the issue on my side. The missing piece was a Gateway network connection that I didn't realize was setup. I'm going to make a ticket off of this and we'll get this resolved. Thanks! ---
**Author:** ![Willem\_Ver\_Eecke](https://avatars.discourse-cdn.com/v4/letter/w/a4c791/32.png) [@Willem\_Ver\_Eecke](https://forum.inductiveautomation.com/u/Willem_Ver_Eecke)\ **Post date:** [January 25, 2023, 8:04am UTC](https://forum.inductiveautomation.com/t/bug-7098-binding-preview-not-showing-after-disconnecting-reconnecting-designer/68779/9 "2023-01-25T08:04:14Z")
Thanks!