# \[BUG\] Designer guides don't round their position label

**URL:** <https://forum.inductiveautomation.com/t/bug-designer-guides-dont-round-their-position-label/32136>\
**Category:** Ignition Early Access\
**Created:** [February 11, 2020, 5:34pm UTC](https://forum.inductiveautomation.com/t/bug-designer-guides-dont-round-their-position-label/32136 "2020-02-11T17:34:44Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![md.szyman](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/md.szyman/32/9240_2.png) [@md.szyman](https://forum.inductiveautomation.com/u/md.szyman)\
**Post date:** [February 11, 2020, 5:34pm UTC](https://forum.inductiveautomation.com/t/bug-designer-guides-dont-round-their-position-label/32136/1 "2020-02-11T17:34:44Z")

</div>

When adding guides in Designer, the position label looks as in the attached screenshot, that is, the value isn’t being rounded.

![image](https://us1.discourse-cdn.com/inductiveautomation/original/2X/7/7e28b15bf535b5944e1590bbf82eb4f8c0af28f3.png)

Using 8.0.9 nightly.