# Build failure - Plugin com.inductiveautomation.ignitionsdk:ignition-maven-plugin:1.0.8-SNAPSHO

**URL:** <https://forum.inductiveautomation.com/t/build-failure-plugin-com-inductiveautomation-ignitionsdk-ignition-maven-plugin-1-0-8-snapsho/14929>\
**Category:** Module Development\
**Created:** [July 29, 2017, 7:11pm UTC](https://forum.inductiveautomation.com/t/build-failure-plugin-com-inductiveautomation-ignitionsdk-ignition-maven-plugin-1-0-8-snapsho/14929 "2017-07-29T19:11:12Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![PRAMANJ](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pramanj/32/66935_2.png) [@PRAMANJ](https://forum.inductiveautomation.com/u/PRAMANJ)\
**Post date:** [July 29, 2017, 7:11pm UTC](https://forum.inductiveautomation.com/t/build-failure-plugin-com-inductiveautomation-ignitionsdk-ignition-maven-plugin-1-0-8-snapsho/14929/1 "2017-07-29T19:11:12Z")

</div>

Hi,

I am running the build for my module using Ignition sdk 7.8.4 after a long gap of few months , which was building properly earlier. The build fails and I get the following error:

Plugin com.inductiveautomation.ignitionsdk:ignition-maven-plugin:1.0.8-SNAPSHOT or one of its dependencies could not be resolved: Failed to read artifact descriptor for com.inductiveautomation.ignitionsdk:ignition-maven-plugin:jar:1.0.8-SNAPSHOT: Failure to find com.inductiveautomation.ignitionsdk:ignition-maven-plugin:pom:1.0.8-SNAPSHOT in [http://nexus.inductiveautomation.com:8081/nexus/content/repositories/inductiveautomation-releases](http://nexus.inductiveautomation.com:8081/nexus/content/repositories/inductiveautomation-releases) was cached in the local repository, resolution will not be reattempted until the update interval of releases has elapsed or updates are forced -\> [Help 1

Has any thing changed in Nexus?

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [July 29, 2017, 11:16pm UTC](https://forum.inductiveautomation.com/t/build-failure-plugin-com-inductiveautomation-ignitionsdk-ignition-maven-plugin-1-0-8-snapsho/14929/2 "2017-07-29T23:16:56Z")

</div>

Use an actual release version of the ignition-maven-plugin. You can just use 1.0.8, or use 1.0.12 which is the latest.

Snapshots eventually get deleted and won’t be available, as you’re seeing.

---

<div class="post-metadata">

**Author:** ![PRAMANJ](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pramanj/32/66935_2.png) [@PRAMANJ](https://forum.inductiveautomation.com/u/PRAMANJ)\
**Post date:** [August 9, 2017, 4:56am UTC](https://forum.inductiveautomation.com/t/build-failure-plugin-com-inductiveautomation-ignitionsdk-ignition-maven-plugin-1-0-8-snapsho/14929/3 "2017-08-09T04:56:41Z")

</div>

Hi Kevin,  
The problem is resolved now. Actually the error generated while building is misleading, It was due to missing dependencies in build.pom for designer+client models , I had only gateway model. So the build we failing giving misleading errors. After removing the entries in build.pom for non-gateway modules the build worked fine. It works with version 1.0.8 to 1.0.12 !

Also I guess the final build jar file should not ver version 1.0-SNAPSHOT it should be 1.0.0 (or whatever release version we have) , or else the .modl file doesn't load in Ignition giving XML error! Is that right.

Thanks a lot again.  
pramanj