# Button border changed after upgrade to 8.1.28 (from 7.9)

**URL:** <https://forum.inductiveautomation.com/t/button-border-changed-after-upgrade-to-8-1-28-from-7-9/89586>\
**Category:** Ignition\
**Tags:** vision\
**Created:** [April 28, 2024, 12:02am UTC](https://forum.inductiveautomation.com/t/button-border-changed-after-upgrade-to-8-1-28-from-7-9/89586 "2024-04-28T00:02:10Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![compuzak](https://avatars.discourse-cdn.com/v4/letter/c/71c47a/32.png) [@compuzak](https://forum.inductiveautomation.com/u/compuzak)\
**Post date:** [April 28, 2024, 12:02am UTC](https://forum.inductiveautomation.com/t/button-border-changed-after-upgrade-to-8-1-28-from-7-9/89586/1 "2024-04-28T00:02:11Z")

</div>

In Ignition version 7.9, all the buttons on my vision forms were raised on all 4 sides of the button. In version 8.1, they were flat after the conversion, but all I could change them to is Bevel (Raised) which is close to the 7.9 version of the button, but only the bottom and right sides of the button appear raised. Is there a way to make a button in 8.1 look the same as the button in 7.9? Seems like a pretty small issue, but some of our users have complained and it seems simple enough, hopefully it is.

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [April 28, 2024, 12:06am UTC](https://forum.inductiveautomation.com/t/button-border-changed-after-upgrade-to-8-1-28-from-7-9/89586/2 "2024-04-28T00:06:40Z")

</div>

This is part of the Look and Feel changes mentioned in the [upgrade guide](https://docs.inductiveautomation.com/docs/8.1/getting-started/installing-and-upgrading/ignition-8-upgrade-guide/79to81-upgrade-guide#look-and-feel-changes).

---

<div class="post-metadata">

**Author:** ![compuzak](https://avatars.discourse-cdn.com/v4/letter/c/71c47a/32.png) [@compuzak](https://forum.inductiveautomation.com/u/compuzak)\
**Post date:** [April 29, 2024, 2:09pm UTC](https://forum.inductiveautomation.com/t/button-border-changed-after-upgrade-to-8-1-28-from-7-9/89586/3 "2024-04-29T14:09:00Z")

</div>

Thanks, I have seen that, but I figure there must be some trick to make a fully raised button to look like the standard raised button available and the default on almost all development systems.