# Calling OPC-UA Methods

**URL:** <https://forum.inductiveautomation.com/t/calling-opc-ua-methods/11070>\
**Category:** Ignition\
**Created:** [January 20, 2016, 6:02am UTC](https://forum.inductiveautomation.com/t/calling-opc-ua-methods/11070 "2016-01-20T06:02:42Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![malleblas](https://avatars.discourse-cdn.com/v4/letter/m/ea666f/32.png) [@malleblas](https://forum.inductiveautomation.com/u/malleblas)\
**Post date:** [January 20, 2016, 6:02am UTC](https://forum.inductiveautomation.com/t/calling-opc-ua-methods/11070/1 "2016-01-20T06:02:42Z")

</div>

Hi,

Is there any facility to call OPC-UA methods from within Ignition and if so, what is the best way of going about this?  
I can see the methods exposed by the OPC-UA server and I can even call them using UAExpert. However in Ignition I can’t seem to do the same.

-Michael

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [January 20, 2016, 4:01pm UTC](https://forum.inductiveautomation.com/t/calling-opc-ua-methods/11070/2 "2016-01-20T16:01:26Z")

</div>

This isn’t supported right now, but it has been on my radar for a while.