# Can I create a non-admin user role with ability to review and terminate Vision Client sessions? **URL:** \ **Category:** Ignition\ **Created:** [April 1, 2020, 4:13pm UTC](https://forum.inductiveautomation.com/t/can-i-create-a-non-admin-user-role-with-ability-to-review-and-terminate-vision-client-sessions/33591 "2020-04-01T16:13:42Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![paul-griffith](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/paul-griffith/32/37249_2.png) [@paul-griffith](https://forum.inductiveautomation.com/u/paul-griffith)\ **Post date:** [April 1, 2020, 4:48pm UTC](https://forum.inductiveautomation.com/t/can-i-create-a-non-admin-user-role-with-ability-to-review-and-terminate-vision-client-sessions/33591/2 "2020-04-01T16:48:30Z")
No, the gateway doesn’t currently support such granular permissions. The ‘Terminate’ button is visible if the client has access to the config section of the gateway. You could put a feature request on [ideas.inductiveautomation.com](http://ideas.inductiveautomation.com), though. If you’ve got at least _one_ client open for supervisors, you could use `system.util.sendMessage()` and `system.util.exit()` to implement basically the same thing - just have a message handler on each client waiting for a terminate message, and run `system.util.exit()`. `system.util.getSessionInfo()` would give you the session ID(s) to terminate. Or, if you dig through this forum, you could find access to the (unsupported and undocumented) internal classes used for the gateway, and use one of those to send a `remote-terminate` push message to the client; that’s as much of a hint as I’ll give. --- _[View the full topic](https://forum.inductiveautomation.com/t/can-i-create-a-non-admin-user-role-with-ability-to-review-and-terminate-vision-client-sessions/33591)._