# Can not see tag for output in tag browser(on/off motor indicator)

**URL:** <https://forum.inductiveautomation.com/t/can-not-see-tag-for-output-in-tag-browser-on-off-motor-indicator/41396>\
**Category:** Ignition\
**Created:** [December 10, 2020, 5:18pm UTC](https://forum.inductiveautomation.com/t/can-not-see-tag-for-output-in-tag-browser-on-off-motor-indicator/41396 "2020-12-10T17:18:13Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![andrews](https://avatars.discourse-cdn.com/v4/letter/a/898d66/32.png) [@andrews](https://forum.inductiveautomation.com/u/andrews)\
**Post date:** [December 10, 2020, 5:18pm UTC](https://forum.inductiveautomation.com/t/can-not-see-tag-for-output-in-tag-browser-on-off-motor-indicator/41396/1 "2020-12-10T17:18:13Z")

</div>

So all I am doing is making indicators on/off for some conveyors. Most work. However there are 3 motors I am unable to see the tag for in igniton.  
Example: O:5/7  
Issue: my tag browser it only goes up to O:4/5  
I’m not sure why I can’t see it? I tried refreshing and still can’t find it.

Any help would be greatly appreciated. Thank you for your time!  
I attached pics

 ![RUNG](https://us1.discourse-cdn.com/inductiveautomation/original/3X/4/4/442227e4dbf063b7818be16f4f3596439c015d31.png) ![TAG BROWSER](https://us1.discourse-cdn.com/inductiveautomation/original/3X/c/6/c62598110650770b4e27e41f2a777b052c84730a.png)

---

<div class="post-metadata">

**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\
**Post date:** [December 10, 2020, 5:48pm UTC](https://forum.inductiveautomation.com/t/can-not-see-tag-for-output-in-tag-browser-on-off-motor-indicator/41396/2 "2020-12-10T17:48:49Z")

</div>

Creation of OPC items in the Tag Browser is not automatic. Where browsing is supported by a device, users typically drag and drop from the OPC Browser. (AB devices mostly support browsing.)

---

<div class="post-metadata">

**Author:** ![andrews](https://avatars.discourse-cdn.com/v4/letter/a/898d66/32.png) [@andrews](https://forum.inductiveautomation.com/u/andrews)\
**Post date:** [December 10, 2020, 6:08pm UTC](https://forum.inductiveautomation.com/t/can-not-see-tag-for-output-in-tag-browser-on-off-motor-indicator/41396/3 "2020-12-10T18:08:14Z")

</div>

But I still don’t see it in the OPC Browser. ![Capture](https://us1.discourse-cdn.com/inductiveautomation/original/3X/b/a/ba933367d18e1a99da541b07f8d68f2104acef89.png)

---

<div class="post-metadata">

**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\
**Post date:** [December 10, 2020, 6:10pm UTC](https://forum.inductiveautomation.com/t/can-not-see-tag-for-output-in-tag-browser-on-off-motor-indicator/41396/4 "2020-12-10T18:10:05Z")

</div>

Try editing the device settings and just clicking save. That’ll restart the device and should make it recheck the length of each of the files in that PLC. Refresh the OPC Browser at that point.

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [December 10, 2020, 6:14pm UTC](https://forum.inductiveautomation.com/t/can-not-see-tag-for-output-in-tag-browser-on-off-motor-indicator/41396/5 "2020-12-10T18:14:39Z")

</div>

If it doesn’t show up in the browse you can still try manually addressing it.