# Can't connect blocks in alarm pipeline

**URL:** <https://forum.inductiveautomation.com/t/cant-connect-blocks-in-alarm-pipeline/26563>\
**Category:** Ignition Early Access\
**Created:** [July 15, 2019, 8:01pm UTC](https://forum.inductiveautomation.com/t/cant-connect-blocks-in-alarm-pipeline/26563 "2019-07-15T20:01:50Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![kmorning](https://avatars.discourse-cdn.com/v4/letter/k/848f3c/32.png) [@kmorning](https://forum.inductiveautomation.com/u/kmorning)\
**Post date:** [July 15, 2019, 8:01pm UTC](https://forum.inductiveautomation.com/t/cant-connect-blocks-in-alarm-pipeline/26563/1 "2019-07-15T20:01:50Z")

</div>

Pipeline blocks can be dragged onto the canvas, but no connections can be made between them. I also tried importing a pipeline from 7.9, which resulted in just the blocks with no connections.

The ignition snapshot I’m using is 8.0.3-b2019071202

---

<div class="post-metadata">

**Author:** ![kmorning](https://avatars.discourse-cdn.com/v4/letter/k/848f3c/32.png) [@kmorning](https://forum.inductiveautomation.com/u/kmorning)\
**Post date:** [July 15, 2019, 8:22pm UTC](https://forum.inductiveautomation.com/t/cant-connect-blocks-in-alarm-pipeline/26563/2 "2019-07-15T20:22:41Z")

</div>

Looks like it's the same bug as this:

> # [[BUG-14463]Alarm Pipeline drawing freeze Designer](http://forum.inductiveautomation.com/t/bug-14463-alarm-pipeline-drawing-freeze-designer/26515)
> 
> [Ignition 8 Early Access](http://forum.inductiveautomation.com/c/ignition-8-early-access)

---

<div class="post-metadata">

**Author:** ![paul-griffith](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/paul-griffith/32/37249_2.png) [@paul-griffith](https://forum.inductiveautomation.com/u/paul-griffith)\
**Post date:** [July 15, 2019, 9:59pm UTC](https://forum.inductiveautomation.com/t/cant-connect-blocks-in-alarm-pipeline/26563/3 "2019-07-15T21:59:34Z")

</div>