# Can't delete Alarms in Alarm Configuration in a UDT

**URL:** <https://forum.inductiveautomation.com/t/cant-delete-alarms-in-alarm-configuration-in-a-udt/6014>\
**Category:** Ignition\
**Created:** [March 11, 2013, 8:22pm UTC](https://forum.inductiveautomation.com/t/cant-delete-alarms-in-alarm-configuration-in-a-udt/6014 "2013-03-11T20:22:11Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Todd\_Stout](https://avatars.discourse-cdn.com/v4/letter/t/e99b99/32.png) [@Todd\_Stout](https://forum.inductiveautomation.com/u/Todd_Stout)\
**Post date:** [March 11, 2013, 8:22pm UTC](https://forum.inductiveautomation.com/t/cant-delete-alarms-in-alarm-configuration-in-a-udt/6014/1 "2013-03-11T20:22:11Z")

</div>

I cannot remove alarms from the Alarm configuration. It doesn’t matter if I ‘Apply’ or just hit ‘OK’. They show back up. If I remove all of them, they go away, but when I add another one it adds them all - even the ones previously deleted.  
I just installed the Beta 2 on top of the old beta. Same UDT that existed before.  
Log attached.  
[logs(1).bin.gz](https://us1.discourse-cdn.com/inductiveautomation/original/2X/d/dcc09209d710ee9b96ae4164800fa2229df69a19.gz) (526 KB)