# Choose Property button in event handler issue

**URL:** <https://forum.inductiveautomation.com/t/choose-property-button-in-event-handler-issue/4424>\
**Category:** Ignition\
**Created:** [May 8, 2012, 6:51am UTC](https://forum.inductiveautomation.com/t/choose-property-button-in-event-handler-issue/4424 "2012-05-08T06:51:31Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![rye22](https://avatars.discourse-cdn.com/v4/letter/r/3ec8ea/32.png) [@rye22](https://forum.inductiveautomation.com/u/rye22)\
**Post date:** [May 8, 2012, 6:51am UTC](https://forum.inductiveautomation.com/t/choose-property-button-in-event-handler-issue/4424/1 "2012-05-08T06:51:31Z")

</div>

Hi I encountered an issue where I can’t seem to open the choose component property window when clicking on the choose component property button inside the event handler/navigation tab when you check the pass parameter checkbox and tried to add a parameter. I’m using Ignition Version 7.4.1 (b906).

---

<div class="post-metadata">

**Author:** ![Michael.Stofan](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/michael.stofan/32/3342_2.png) [@Michael.Stofan](https://forum.inductiveautomation.com/u/Michael.Stofan)\
**Post date:** [May 14, 2012, 10:56pm UTC](https://forum.inductiveautomation.com/t/choose-property-button-in-event-handler-issue/4424/2 "2012-05-14T22:56:23Z")

</div>

Make sure you’re not double-clicking into the property cell. Just selecting it is all that’s needed to use the property selector. Otherwise, we might have a legitimate issue.

On another note I recommend upgrading to 7.4.2 especially if you are using SQLTags History, given that there was an issue with it in 7.4.1.