# Clear alarm after setting enabled expression

**URL:** <https://forum.inductiveautomation.com/t/clear-alarm-after-setting-enabled-expression/42252>\
**Category:** Ignition\
**Tags:** ignition80\
**Created:** [January 14, 2021, 6:02pm UTC](https://forum.inductiveautomation.com/t/clear-alarm-after-setting-enabled-expression/42252 "2021-01-14T18:02:15Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![DaveRNeal](https://avatars.discourse-cdn.com/v4/letter/d/53a042/32.png) [@DaveRNeal](https://forum.inductiveautomation.com/u/DaveRNeal)\
**Post date:** [January 14, 2021, 6:02pm UTC](https://forum.inductiveautomation.com/t/clear-alarm-after-setting-enabled-expression/42252/1 "2021-01-14T18:02:15Z")

</div>

Good Morning,

I have an issue with a few alarms that I’m trying to clear. They became active before I set an expression binding to the alarm’s “Enabled” property. As the expression is currently written, the alarm should be disabled, however the active alarms don’t seem to be clearing. Even after disabling the alarm completely, they still show up in the Alarm Status Table. Is there a way I can clear these up manually?