# Client access for Distribution Groups

**URL:** <https://forum.inductiveautomation.com/t/client-access-for-distribution-groups/3685>\
**Category:** Ignition\
**Created:** [December 1, 2011, 10:19pm UTC](https://forum.inductiveautomation.com/t/client-access-for-distribution-groups/3685 "2011-12-01T22:19:55Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Greg.Buehler](https://avatars.discourse-cdn.com/v4/letter/g/ecc23a/32.png) [@Greg.Buehler](https://forum.inductiveautomation.com/u/Greg.Buehler)\
**Post date:** [December 1, 2011, 10:19pm UTC](https://forum.inductiveautomation.com/t/client-access-for-distribution-groups/3685/1 "2011-12-01T22:19:55Z")

</div>

Is it possible to allow users to modify the Alarm Distribution Groups from the client? For example, I’d like to build a maintenance screen for the supervisors on duty so they can rotate maintenance staff through a pager group.

---

<div class="post-metadata">

**Author:** ![Travis.Cox](https://avatars.discourse-cdn.com/v4/letter/t/b9bd4f/32.png) [@Travis.Cox](https://forum.inductiveautomation.com/u/Travis.Cox)\
**Post date:** [December 1, 2011, 10:26pm UTC](https://forum.inductiveautomation.com/t/client-access-for-distribution-groups/3685/2 "2011-12-01T22:26:49Z")

</div>

Sure thing:

[files.inductiveautomation.com/ex … Lists.vwin](http://files.inductiveautomation.com/extras/AlertDistributionLists.vwin)

Import that window into your project.