# Client on RPi NOOBS 3.2 **URL:** \ **Category:** Ignition\ **Created:** [September 6, 2019, 3:48pm UTC](https://forum.inductiveautomation.com/t/client-on-rpi-noobs-3-2/28079 "2019-09-06T15:48:05Z")\ **Posts on this page:** 17\ **Page:** 1
**Author:** ![ryanastiefes](https://avatars.discourse-cdn.com/v4/letter/r/47e85d/32.png) [@ryanastiefes](https://forum.inductiveautomation.com/u/ryanastiefes)\ **Post date:** [September 6, 2019, 3:48pm UTC](https://forum.inductiveautomation.com/t/client-on-rpi-noobs-3-2/28079/1 "2019-09-06T15:48:05Z")
Ignition Server 7.8.5 RPi 3 model b NOOBS 3.2 I am by far an expert with linux, but I have installed clients on RPi’s before with no problems. I installed a new version of NOOBS on my RPi which seems to have a better resolution which is good for my application of running clients and using the pre-installed VNC Server. Problem I’m running into is after I have uncompressed the tar.gz and run the .sh I get the desktop icon. When I click on the icon ignition downloading screen pops up and starts downloading the project, but about four seconds in I get an Error Launching screen saying: ’ Error launching application: NoSuchMethodError: java.util.jar.Pack200$Unpacker.addPropertyChangeListener(Ljava/beans/PropertyChangeListerner;)V I’m assuming there is a a file dependant missing, but I have no clue where to start. ---
**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\ **Post date:** [September 6, 2019, 3:50pm UTC](https://forum.inductiveautomation.com/t/client-on-rpi-noobs-3-2/28079/2 "2019-09-06T15:50:26Z")
What version of Java do you have installed? ---
**Author:** ![ryanastiefes](https://avatars.discourse-cdn.com/v4/letter/r/47e85d/32.png) [@ryanastiefes](https://forum.inductiveautomation.com/u/ryanastiefes)\ **Post date:** [September 6, 2019, 3:52pm UTC](https://forum.inductiveautomation.com/t/client-on-rpi-noobs-3-2/28079/3 "2019-09-06T15:52:43Z")
11.0.3 ---
**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\ **Post date:** [September 6, 2019, 3:53pm UTC](https://forum.inductiveautomation.com/t/client-on-rpi-noobs-3-2/28079/4 "2019-09-06T15:53:25Z")
That’s not going to work with an older version of Ignition. You’ll probably need Java 7 or 8. ---
**Author:** ![ryanastiefes](https://avatars.discourse-cdn.com/v4/letter/r/47e85d/32.png) [@ryanastiefes](https://forum.inductiveautomation.com/u/ryanastiefes)\ **Post date:** [September 6, 2019, 3:53pm UTC](https://forum.inductiveautomation.com/t/client-on-rpi-noobs-3-2/28079/5 "2019-09-06T15:53:51Z")
Gotcha, I will start there. Thanks ---
**Author:** ![ryanastiefes](https://avatars.discourse-cdn.com/v4/letter/r/47e85d/32.png) [@ryanastiefes](https://forum.inductiveautomation.com/u/ryanastiefes)\ **Post date:** [September 6, 2019, 4:01pm UTC](https://forum.inductiveautomation.com/t/client-on-rpi-noobs-3-2/28079/6 "2019-09-06T16:01:51Z")
That worked, thank you! ---
**Author:** ![nminchin](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/nminchin/32/6911_2.png) [@nminchin](https://forum.inductiveautomation.com/u/nminchin)\ **Post date:** [December 19, 2019, 5:56am UTC](https://forum.inductiveautomation.com/t/client-on-rpi-noobs-3-2/28079/7 "2019-12-19T05:56:37Z")
I’m just getting this now as well, Ignition 7.9.5, Java 8 u161. I started up a client from another site on the same machine with no issues; it is running Ignition 7.9.12. ![image](https://us1.discourse-cdn.com/inductiveautomation/original/2X/2/289d33f180c80ea46db1607158cfd6626c321d85.png) ```auto Downloading "http://:8088/main/system/jar/m/jide-components-3.5.13.jar" (timeout=60000)... Connect successful. Starting download of 94429 bytes Download successful (in 206ms), unpacking... Launch failed on step "DownloadJarsStep" with error: java.lang.NoSuchMethodError: java.util.jar.Pack200$Unpacker.addPropertyChangeListener(Ljava/beans/PropertyChangeListener;)V at com.inductiveautomation.ignition.client.launch.steps.DownloadJarsStep.downloadJar(DownloadJarsStep.java:210) at com.inductiveautomation.ignition.client.launch.steps.DownloadJarsStep.access$100(DownloadJarsStep.java:50) at com.inductiveautomation.ignition.client.launch.steps.DownloadJarsStep$DownloadJarsAction.run(DownloadJarsStep.java:87) at com.inductiveautomation.ignition.client.launch.steps.DownloadJarsStep$DownloadJarsAction.run(DownloadJarsStep.java:68) at com.inductiveautomation.ignition.client.launch.steps.AbstractLaunchStep.runLockedAction(AbstractLaunchStep.java:95) at com.inductiveautomation.ignition.client.launch.steps.BaseStep.runLockedAction(BaseStep.java:34) at com.inductiveautomation.ignition.client.launch.steps.DownloadJarsStep.run(DownloadJarsStep.java:65) at com.inductiveautomation.ignition.client.launch.AbstractStepRunner.run(AbstractStepRunner.java:33) at java.base/java.lang.Thread.run(Unknown Source) ``` ---
**Author:** ![nminchin](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/nminchin/32/6911_2.png) [@nminchin](https://forum.inductiveautomation.com/u/nminchin)\ **Post date:** [February 9, 2020, 10:41pm UTC](https://forum.inductiveautomation.com/t/client-on-rpi-noobs-3-2/28079/8 "2020-02-09T22:41:35Z")
I’m getting this again on another machine when starting up the Designer… I’m not sure how I resolved it the last time I had it above 🤔 ---
**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\ **Post date:** [February 9, 2020, 11:13pm UTC](https://forum.inductiveautomation.com/t/client-on-rpi-noobs-3-2/28079/9 "2020-02-09T23:13:06Z")
Make sure you’re actually running/launching with Java 8 and not a newer version. ---
**Author:** ![nminchin](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/nminchin/32/6911_2.png) [@nminchin](https://forum.inductiveautomation.com/u/nminchin)\ **Post date:** [February 9, 2020, 11:15pm UTC](https://forum.inductiveautomation.com/t/client-on-rpi-noobs-3-2/28079/10 "2020-02-09T23:15:05Z")
Java version is 8 u25x on that machine (can’t quite remember what number the x was) ---
**Author:** ![Hitesh\_Rathod1](https://avatars.discourse-cdn.com/v4/letter/h/ea666f/32.png) [@Hitesh\_Rathod1](https://forum.inductiveautomation.com/u/Hitesh_Rathod1)\ **Post date:** [May 16, 2024, 10:52am UTC](https://forum.inductiveautomation.com/t/client-on-rpi-noobs-3-2/28079/11 "2024-05-16T10:52:34Z")
How did you resolve this problem. I have the same issue with using Azul 8. I am not able to open designer and clients. I am getting the same error. I am using Ignition 7.6.7 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/0/8/089352254c0d121a54e244adc30bd2a6485f40ef.png) ---
**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\ **Post date:** [May 16, 2024, 2:12pm UTC](https://forum.inductiveautomation.com/t/client-on-rpi-noobs-3-2/28079/12 "2024-05-16T14:12:16Z")
Are you sure there's not another version of Java installed that is being used to launch? Open a terminal and run `java --version`, what does it say? ---
**Author:** ![Hitesh\_Rathod1](https://avatars.discourse-cdn.com/v4/letter/h/ea666f/32.png) [@Hitesh\_Rathod1](https://forum.inductiveautomation.com/u/Hitesh_Rathod1)\ **Post date:** [May 16, 2024, 2:41pm UTC](https://forum.inductiveautomation.com/t/client-on-rpi-noobs-3-2/28079/13 "2024-05-16T14:41:37Z")
Yes, We don't have another java version. It's only Azul ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/9/3/9327342a5d885de3365ef6e2b3a79b20f2b3a193.png) ---
**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\ **Post date:** [May 16, 2024, 2:51pm UTC](https://forum.inductiveautomation.com/t/client-on-rpi-noobs-3-2/28079/14 "2024-05-16T14:51:50Z")
How are you launching? Is there a Java console you can open/enable somewhere? In Control Panel maybe? I can't remember how these old versions work. ---
**Author:** ![Hitesh\_Rathod1](https://avatars.discourse-cdn.com/v4/letter/h/ea666f/32.png) [@Hitesh\_Rathod1](https://forum.inductiveautomation.com/u/Hitesh_Rathod1)\ **Post date:** [May 16, 2024, 2:55pm UTC](https://forum.inductiveautomation.com/t/client-on-rpi-noobs-3-2/28079/15 "2024-05-16T14:55:00Z")
What I see, Java is in system 32 folder. do you think this would be creating a problem. But I don't see Java in installed program and Features. ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/8/d/8d3425d732541e0bfe42435a36087e52f7b90224.png) ---
**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\ **Post date:** [May 16, 2024, 3:15pm UTC](https://forum.inductiveautomation.com/t/client-on-rpi-noobs-3-2/28079/16 "2024-05-16T15:15:21Z")
Maybe, and that looks like Java 7 and not the Java 8 you saw from `java -version`. You should probably call support and let them take a look. ---
**Author:** ![JordanCClark](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jordancclark/32/83362_2.png) [@JordanCClark](https://forum.inductiveautomation.com/u/JordanCClark)\ **Post date:** [May 16, 2024, 3:19pm UTC](https://forum.inductiveautomation.com/t/client-on-rpi-noobs-3-2/28079/17 "2024-05-16T15:19:59Z")
Check for a java path in the environment variables.