# Cognex integration with Modbus

**URL:** <https://forum.inductiveautomation.com/t/cognex-integration-with-modbus/22824>\
**Category:** General Discussion\
**Created:** [February 22, 2019, 11:12pm UTC](https://forum.inductiveautomation.com/t/cognex-integration-with-modbus/22824 "2019-02-22T23:12:59Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![hendrisvs](https://avatars.discourse-cdn.com/v4/letter/h/97f17d/32.png) [@hendrisvs](https://forum.inductiveautomation.com/u/hendrisvs)\
**Post date:** [February 22, 2019, 11:12pm UTC](https://forum.inductiveautomation.com/t/cognex-integration-with-modbus/22824/1 "2019-02-22T23:12:59Z")

</div>

Hi, I’m integrating a Cognex Insight 2000 system. I’m trying to use a Modbus protocol, but I do not know if it is possible to use a Trigger from Ignition to take an image. I read about the addressing, but I can´t yet.

---

<div class="post-metadata">

**Author:** ![cognex\_information](https://avatars.discourse-cdn.com/v4/letter/c/b4bc9f/32.png) [@cognex\_information](https://forum.inductiveautomation.com/u/cognex_information)\
**Post date:** [September 16, 2019, 3:20pm UTC](https://forum.inductiveautomation.com/t/cognex-integration-with-modbus/22824/2 "2019-09-16T15:20:21Z")

</div>

Hi @hendrisvs documents for the Cognex In-Sight 2000 and other products can be found in [the MyCognex portal](https://support.cognex.com/en/Home/login) for customers.You can register products, download manuals, get support documentation, and contact our support team. I noticed no one responded to this post for you, so if you still can’t find what you need, contact us through this prioritized customer system!